Howard Wood-N-Floors 946 - liquid for cleaning wooden, laminate and vinyl floors, without streaks and sticky residue

Howard Wood-N-Floors 946 ml – Ready-to-use Hardwood, Laminate, and Vinyl Floor Cleaner

Howard Wood-N-Floors Hardwood Floor Cleaner is a ready-to-use, quick-drying product designed for regular cleaning of finished floors and other household surfaces. It effectively removes dust, dirt, and everyday grime without leaving a sticky residue or streaks.

The water-based formula contains plant-based surfactants that gently cleanse the surface and reveal its natural shine. The product does not require dilution and can be used on finished wood floors, LVP vinyl planks, laminates and engineered floors, as well as on furniture and cabinets.

• Ready-to-use formula - no dilution required.

• Quickly removes dirt and everyday stains.

• Leaves no sticky residue or streaks.

• Dries quickly.

• Helps reveal the natural shine of the cleaned surface.

• Water-based formula with plant-based surfactants.

• Suitable for various types of finished floors.

• Can also be used to clean furniture, cabinets and other finished surfaces.

• Efficient - a small amount of the preparation is enough to clean surfaces.

Howard Wood-N-Floors is intended for cleaning:

• finished solid wood floors,

• layered wood floors,

• parquet floors protected with a suitable coating,

• laminate floors,

• LVP vinyl panels,

• finished wooden furniture,

• cabinets and furniture fronts,

• other moisture-resistant, finished surfaces indicated by the manufacturer.

The product is not intended for use on raw, unsealed or unfinished wood. Before cleaning, make sure the surface is suitable for water-based care products.

How to use

1. Remove loose dust, sand, and other dirt with a vacuum cleaner or broom.

2. Before first use, test on a small, inconspicuous area of ​​the surface.

3. Apply a small amount of the product to a soft cloth or microfiber mop.

4. Clean the surface in the direction of the wood grain.

5. Add another small amount of the product if necessary.

6. Always wipe the cleaned surface dry.

A small amount of the product is enough to clean a large area. Do not over-wet or saturate the floor with the liquid.

Removing heavier stains

1. Spray the preparation directly onto the dirty surface.

2. Leave for 1-2 minutes.

3. Wipe the area dry with a soft cloth.

4. Do not leave standing water or unwiped product on the surface.

• Product type: preparation for cleaning floors and finished surfaces

• Form: ready-to-use liquid

• Base: water

• Cleaning ingredients: surfactants of natural origin plant-based

• Application: wooden floors, engineered floors, laminates, LVP vinyl planks, furniture and cabinets

• Effect: clean surface without sticky residue and streaks

• Dilution: not required

• Capacity: 946 ml (32 fl oz)

• Manufacturer: Howard Products, Inc.

• Brand Country of Origin: USA

• Do not use on raw, unfinished or unprotected surfaces.

• Do not saturate the floor with the preparation.

• Wipe off any standing water or product residue immediately with a soft cloth. cloth.

• Always test in an inconspicuous area before use.

• Do not mix with other chemicals.

Keep out of reach of children. Avoid contact with eyes and do not swallow the product. In case of contact with eyes or skin, rinse thoroughly with water. If swallowed, consult a doctor immediately. Read the information on the package label before use.