65W Automatic Booster Pump 24L min High Lift Quiet Water Pressure Pump for Solar Water Heater Shower Head Pipeline

Feature: 1. Automatic Control: This household booster pump features water sensing technology to start and stop automatically when you turn the faucet on or off, with an added manual control key for convenience 2. Powerful Performance: The water pressure booster pump uses all brass cored motor and all copper coil, ensuring extended durability and strong power, preventing overheat during prolonged pump use 3. IP56 Water Proof: With an IP56 protective rating, this automatic water pressure booster pump resists water ingress, making it safe for use in wet environments like bathroom showers and outdoor irrigation 4. Silent and Energy Saving: This booster pump offers high efficiency and low power consumption, providing your family with a more comfortable and quiet environment. Easy to install and widely applicable 5. Versatile Application: This water pump is also suitable for places that do not require a large flow rate, such as faucets, toilets, boilers, showers, bathrooms, kitchens, water heaters, solar systems, or garden and agricultural irrigation Specification: Item Type: Automatic Booster Pump Product Material: ABS, Brass Power: 65W Rated Flow Rate: 22L min Maximum Flow Rate: 24L min Rated Head: Approx. 15m 49.2ft Maximum Head: Approx. 17m 55.8ft Diameter: DN15 Environment Temperature: 0 40 celsius Medium Temperature: 4 90 celsius Insulation Class: Class H Protective Grade: IP56 Connection Method: Thread Product Size: Approx. 15 x 8.5 x 9.5cm 5.9 x 3.3 x 3.7in (Including the convex part). Package List: 1 x Booster Pump 1 x Supply Adapter 2 x Expansion Screws 2 x Expansion Tubes 1 x Water Pipe 1 x No Drill Mounting Sticker 1 x User Manual Note: 1. This product is equipped with an intelligent water flow switch. In automatic mode, the machine will only start when the water flow in the pipeline reaches a certain level. If the water pressure is too low to trigger the flow switch, press the middle key to switch to self start mode (the self start indicator will be on).2. This product cannot be served as a submersible pump. Do not immerse it in water for a long time to avoid damaging the machine.3. It is recommended to use leather gaskets to seal the pump inlet and outlet ports. PTFE tape wrapping is not advised.4. This pump uses 24VDC 2.5 5A power. Before use, it is necessary to confirm the power adapter; otherwise, it may cause burnout or failure to operate normally. This pump has no self priming function. After installation, it is necessary to ensure that there is no air in the pipeline and water can flow into the pump. Otherwise, the pump will not operate normally, or it will generate a lot of noise and cause wear of parts. The pump is lubricated with water. The operation time without water should not exceed 10 seconds (it has been set that the pump will automatically stop after 10 seconds of operation without water), and the pump shaft should remain in a horizontal position.Use Conditions: Maximum System Pressure: No more than 5bar;Ambient Temperature: 0 40 celsius Medium Temperature: 4 90 celsius Medium: Clean, non flammable, no explosion and no solid particles, using similar to clear water