Label:Yes
Specification: 75*43mm(2.95*1.69in)
Color: Red Cover Red (Light Red)
Battery: Two No. 7 batteries (batteries are not included at the factory)
Power supply: 2 No. 7 batteries (you can directly install the batteries by opening the red panel on the front)
Material:Plastic
Product Name: 9LED Bicycle Tail Light
The aperture scaling of the lamp clip is suitable for 1-5CM(0.39-1.97in), and the installation aperture should be less than 3.5cm(1.38in)
Brand new with high quality
Quantity:1pc
Flash mode:
Press once: 9 lights will stay on for a long time
Second time: 9 lights jump and flash quickly together
Third time: 9 lights are flashing slowly in unison
Fourth to Seventh: Nine rolling lights flashing in different directions
Eighth step: Close
Bicycle specific anti-collision lights, with 9 super bright LEDs inside, three red, three green, three blue/6 red;
This lamp is suitable for installation on all types of bicycles (the installation diameter should be less than 35mm(1.38in)), and can also be hung on a bag with a light strip for use.
High brightness, with a built-in reflective bowl in the front, further increases the brightness by 30% on the basis.
Bright appearance makes battery installation easier. It can be opened with a dime.
Seven flashing modes, quick release design, waterproof and shockproof, especially suitable for off-road bicycles and friends who often ride at night
Introduction: Bicycle specific waterproof and shockproof tail lights, unique high brightness lighting design, with 9 high brightness LEDs and 4 dimming modes inside. The lamp center is pressed from left to right in a 2-2-1-2-2 pattern, and the lamp cover adopts a middle red and transparent style on both sides, which is generous and novel. Especially suitable for high-end bicycles and friends who often ride at night. Originating from European design and certified by CE, the quality is more reliable. Using VYI high hardness plastic, there will be no fracture problem during cycling. High brightness, using a special A-level lamp head, with a high-quality reflective bowl built in the front, which further increases the brightness by 40% on the original basis.
Instructions for use: A single button control switch is located on the back, and there is also a clip (clamp) on the back that can be clipped onto bicycles, belts, shoulders, backpacks, backpacks, and other personal items to serve as a safety warning and ensure personal safety.
Features:
1. There are 9 LEDs in color, three red, three green, and three blue, with a quick release design that is waterproof and shockproof
2. Easy to install the battery, simply pry open the small opening on the side with a one yuan coin
3. It can also be hung on a car bag with a light strip for practical use
Package Includes:
1pc Electric Bike Bicycle Taillights Led Red Taillight
Notice:
1.1cm(0.43in)=10mm=0.39inch.
2.Please allow 1-2mm(0.04-0.08in) error due to manual measurement and make sure you do not mind before ordering.
3.Please understand that colors may exist chromatic aberration as the different placement of pictures.
Возврат по недоставке
