2PCS CV boots are equipped with 4 stainless steel clips and 6 cable ties waterproof and dustproof CV axle boot repair kit for protecting the shaft

2PCS CV boots are equipped with 4 stainless steel clips and 6 cable ties, waterproof and dustproof CV axle boot repair kit for protecting the shaft, and universal CV joint boots suitable for most cars (2PCS) Specification: The shaft sleeve is 4.72 inches long, with a small port inner diameter of 0.78 inches, and comes in three different calibers: 2.55 inches/65 millimeters, 3.14 inches/80 millimeters, and 3.54 inches/90 millimeters. Please check the size data you need before purchasingYou will receive: 2 CV joint boots, 4 stainless steel clips, and 6 cable ties. Suitable for most vehicles. Installation is simple, you just need to remove the old or worn CV boots, and then use the installation cone to place the new CV axle boots into the axleExcellent protection: CV shaft boots are like a sturdy shield, providing comprehensive protection. It can effectively prevent the invasion of dust, sand, water and other impurities, while avoiding the overflow of lubricating grease from the ball cageGood quality: Made of high-quality silicone material, it has excellent wear resistance and high temperature resistance. The softness and elasticity of silicone enable the CV luggage compartment to fit tightly without loosening or falling off due to vehicle vibrationsMaintenance: In the daily maintenance of vehicles, it is necessary to regularly check the constant velocity universal joint boots for signs of damage, cracks, aging, deformation, and whether the fixing devices at both ends are loose. If any damage is found, it should be replaced promptlySpecifications:Color: BlackSize: 4.72x3.54x3.54 inchesWeight: 8.26 ouncesMaterial: Siliconepacking:2 x CV boots2 x large stainless steel clamps2 x small stainless steel clips6 x Nylon zip tiesProduct features and functions1. The CV axle shoe kit helps maintain the transmission efficiency and accuracy of the CV axle by avoiding the entry of dust and impurities, as well as the leakage of grease, reducing vibration and noise, making the vehicle travel smoother and quieter. At the same time, it also reduces the failure rate of constant speed axles, lowers maintenance and time costs2. The CV shaft sleeve is made of silicone and has a certain degree of flexibility and elasticity. Its shape is similar to a bellows sleeve, which can be tightly wrapped around the outside of the axle, completely enveloping it3. This kit includes stainless steel clips and cable ties to securely connect CV universal joint boots to the axle neck and housing of the vehicle, enhancing sealing performanceinstaller1. Apply lubricating grease: Apply an appropriate amount of lubricating grease inside the axle. The function of lubricating grease is to reduce friction, minimize wear, and aid in heat dissipation and prevent rusting. Keep the grease evenly applied, not too much or too little2. Place axle boots: Use a conical installation tool to carefully place the new axle boots on the axle, ensuring they fully cover it. Note that the opening direction of the axle shoe should be placed correctly, usually with the large opening facing the outside of the axle and the small opening facing the inside of the axle3. Fixed shaft sleeve: Use the clips or cable ties in the packaging to securely fix the shaft sleeve to the axle. Ensure that the clamp or clip is correctly installed and tightened. Do not loosen or detach the dust cover or damage the axle due to being too tightbe careful:The true color of an item may vary slightly due to various factors, such as the brightness of your monitor and lighting.2. Please allow for slight manual measurement deviations in the data3. Please make sure to carefully check the size of the required product before placing an order to avoid buying the wrong one Comprehensive Protection: Effectively prevents dust, sand, water and other impurities from invading while avoiding lubricating grease overflow

High-Quality Silicone Material: Offers excellent wear resistance and high temperature resistance, with softness and elasticity for tight fit without loosening due to vehicle vibrations

Complete Repair Kit: Includes 2 CV joint boots, 4 stainless steel clips and 6 cable ties for secure connection and enhanced sealing performance

Universal Fit: Suitable for most vehicles with three different calibers (2.55 inches/65mm, 3.14 inches/80mm, 3.54 inches/90mm) and 4.72 inches length

Simple Installation: Easy to install by removing old boots and using the installation cone to place new ones, then fixing with clips or cable ties.