COB LED Set 10m 12V 3000K Warm Strong Color Power Supply Remote Control
Complete kit for the professional
Save valuable time and eliminate the risk of assembly errors by choosing a ready-made, 10-meter kit with a 12V COB LED strip, which includes perfectly matched components of the highest quality. Guarantee your customers a spectacular effect of a uniform line of light without visible dots, which, combined with the exceptional durability and reliability of the installation, will directly translate into increase in your profits and trust.
One purchase complete set
The set includes:
COB LED strip 12V 10m 3000K
Mounting power supply 12V 100W
Dimmer (Remote Control) Controller
Mounting connector
COB LED strip 3000K
Technology: COB (Chip on Board)
Number of diodes: 320 LEDs per meter
Light color: Warm (3000K)
Possibility of cutting: every 2.5 cm
Ingress protection class: IP20 with an additional cover guaranteeing waterproofness
CRI (Ra): 90 (perfect color rendering)
Mounting: 3m self-adhesive tape
12V 100W mounting power supply
Output voltage: 12 V DC
Current: 8.3 A
Maximum power: 100 W
Input voltage: 100265 V AC (universal)
Protection class: IP20 (for dry rooms)
Housing type: Metal, perforated (Slim)
Cooling: Passive (free air circulation)
Protections: SCP (short circuit), OLP (overload), OVP (over voltage)
Driver Remote control
Supply voltage:DC 524 V
Maximum current: 6 A
Maximum output power: 5V:30W / 12V:72W / 24V:144W
Control range: 1015 m (indoors)
Dimmer dimensions: 50 12 5 mm
Remote control dimensions: 85 40 6 mm
Connectors: Male and female DC plug 5.5 2.1 mm
Operating temperature: -20 60C
Functions: 8 dynamic modes, 10 speed and brightness levels
Mounting connector
Connector type: Straight, clamp (tape-tape)
Inner width: 8 mm (standard Mono)
External dimensions: 18 10 4.6 mm
Color: (does not block light)
Operating voltage: 1224V DC (max 36V)
Maximum current: 5 A
Installation: Solderless, manual (you can use pliers)
Ingress protection: IP20
questions and answers
Does the tape fit the profiles? Aluminum?
Yes, the standard width of 8mm makes it compatible with most LED strips and profiles.
Can I cut the strip anywhere?
No, cutting is only possible in designated places with a scissors symbol, which repeats every 2.5 cm.
Does the power supply hum or squeak during operation?
Thanks to the switching technology and passive cooling, the power supply operates quietly and does not disturb household members.
Do I have to aim the remote control at the controller?
No, RF radio technology works through obstacles such as furniture or shelves.
Good installation practices
Carefully degrease the surface before applying
LED strips have double-sided adhesive tape (usually 3M) on the back. However, for it to work properly, the surface must be perfectly clean.
Preparation: Wipe the inside of the aluminum profile with isopropyl alcohol (IPA) or another degreaser and wait for it to dry completely.
Avoid sharp bending of the tape
COB strips are covered with a continuous layer of phosphor. They are flexible, but much more sensitive to sharp bends than traditional SMD tapes.
Right angles: Never bend the tape at a 90-degree angle (e.g., in wall corners). This may cause the tracks to break or the phosphor to be damaged.
Solution: In the corners, cut the tape (only in the designated places!) and connect it at an angle using short cables, or form a smooth, soft loop.
Below are sample arrangements for the color 3000K
Length: 10 meters
Voltage: 12V DC
Power: 10.5W/m
Width: 8 mm
Dimensions: 188 46 35 mm
Compatibility: COB and SMD LED strips
Material: Fireproof polycarbonate (PC)
Application: When applying the tape, press it gently but firmly, trying not to apply too much pressure directly on the COB coating