Joom: Товар может вызывать аллергическую реакцию. Перед использованием ознакомьтесь с инструкцией и информацией на упаковке. Для получения дополнительной информации вы можете связаться с продавцом или производителем напрямую.
-----
Product Introduction
Easily reapply over makeup
UV Cut Face Powder
This one product handles makeup touch-ups and UV protection.
Non-greasy, no mess, easily adds UV cut effect over makeup.
Controls shine for a soft, natural finish.
Translucent beige color that blends well with skin.
Portable brush integrated design. Oil-free. Waterproof.
Ingredients
Silica, Titanium Dioxide, Zinc Oxide, Stearic Acid, Aluminum Hydroxide, Tromethamine, Diglyceryl Glutamate, Magnesium Chloride, Magnesium Stearate, Triethoxycaprylylsilane, Tin Oxide, Tocopherol, Chlorphenesin, Fragrance, Synthetic Mica, Iron Oxide, Barium Sulfate, Mica.
*Actual ingredients may vary due to product improvements or changes in labeling. Please refer to the product label for actual ingredients.
Usage Instructions
Use over foundation or makeup.
Remove the brush cap, lower the brush cover, and slowly apply from the center of the face outward.
If you feel there is little powder coming out, tap the brush on the back of your hand or tissue to load it with powder. When the skin feels smooth, it indicates readiness for application.
After use, wipe off any remaining powder from the brush and inside the brush cap with tissue, then securely close the brush cap by pulling the brush cover up until it clicks.
*Before First Use*
(
1) Remove the brush cap. Pull out and discard the white pin in the center of the brush.
(
2) Lower the brush cover all the way down.
(
3) Tap the brush lightly on the back of your hand or tissue until powder comes out at the brush tip, ensuring the brush is well loaded with powder.
*Brush Care Instructions*
(
1) Turn the blue part at the base of the brush counterclockwise. After removing the brush, raise the brush cover and close the container cap to prevent powder spillage.
(
2) Dissolve neutral detergent in lukewarm water and gently wash the brush with your fingertips, rinsing thoroughly with running water to ensure no detergent remains.
(
3) Wipe the brush and base dry with tissue and allow to dry completely in a well-ventilated, shaded area. Ensure the brush and base are completely dry before reassembling.
When removing the brush, powder may spill. Always place paper under the container and remove the
Товар из Японии 
Возврат по недоставке
