US-52 Model Speed Regulator Controller Plastic AC Motor Regulator Industrial Applications

Label:Yes Rotation Speed Range: 90-1400r/min Material : PVC Opening Installation Dimensions: Width 50mm(1.97in), Height 82mm(3.23in), Screw Installation Distance 90mm(3.54in) Optional Power: 400W size: 100*90*60mm(3.94*3.54*2.36in) Product Model: US-52 Ordinary

Method of use 1. Turn off the power, connect it according to the wiring diagram and make sure the connection is correct. 2. Fix the controller well and set the speed to the lowest "0", so as to avoid sudden large current and permanent damage when starting the power supply; 3. Then turn on the power and adjust the speed knob to the desired position. Please turn off the power when not needed; 4. The governor is connected to the motor. If the torque or speed is found to be inconsistent with the requirements, please adjust the fine-tuning potentiometer on the side of the product 5. To change the running direction of the motor, simply replace the jumper lines of "CCW" and "CW" on the back of the controller. 6. Select COM and CW short connection, then the motor will rotate clockwise. 7. Select COM and CCW short connection, then the motor do counterclockwise rotation. (when changing direction, do not change the direction until the motor stops running completely.)

Wiring method Black wire is the motor main wire, red and white are the capacitor auxiliary wires, and 2 blue wires are the speed control feedback wires, the green wire is the ground wire.

Package includes 1 x Speed Controller

Notes 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm(0.39-1.18in) measuring deviation due to manual measurement.