XH-M609 Low Voltage Disconnect Switch 12V-36V Digital LED Display Auto Cut Off for Backup Power Battery Protection

### Product Overview XH-M609 Low Voltage Disconnect Switch is a reliable over-discharge protection solution for 12V, 24V, 36V lithium-ion batteries, equipped with a clear digital LED display for easy parameter checking and adjustment.

### Core Features 1. This programmable low voltage disconnect module is compatible with DC 12-36V lithium-ion batteries. *Note: This is a protection switch module only, batteries are not included in the package.* 2. Adjust low voltage disconnect parameters easily via the on-board momentary push buttons, all settings are clearly displayed on the 3-digit red LED screen for hassle-free operation. 3. The module automatically disconnects the load once the battery voltage drops to your preset value, effectively preventing battery over-discharge to greatly prolong your battery’s service life. 4. High 0.1V display and control accuracy ensures stable performance: the switch triggers quickly when voltage approaches the minimum threshold. All settings are stored in non-volatile memory, so they won’t be lost after power off.

### Specifications Model: XH-M609 Input Voltage: DC 12-36V (output voltage equals input voltage) Display Accuracy: 0.1V Control Accuracy: 0.1V Voltage Error: ±0.1V Applicable Scenario: 12-36V lithium batteries Product Size: 57*42*19mm Compatible Battery Type: Lithium-ion battery Package Contents: 1 x XH-M609 Low Voltage Disconnect Switch

### Operation Guide 1. Double-click the "+" button, then press "+" or "-" to set the cut-off voltage value. 2. Double-click the "-" button, then press "+" or "-" to set the recovery voltage value. 3. Single-click the "+" button first, then press "+" or "-" to calibrate the input voltage display. 4. Single-click the "-" button first, then press "+" or "-" to set the delayed start time T. When the input voltage reaches the start threshold, output will be activated after T minutes. Delay time ranges from 0 to 10 minutes, optional values are 000 / 001 / 005 / 010. 5. Single-click the "+" button to check the set cut-off voltage value. 6. Single-click the "-" button to check the set recovery voltage value. 7. The difference between cut-off voltage and recovery voltage can be set between 0.5V and 48V.

#### What is the difference value? It refers to the gap between the battery cut-off voltage and the reconnection voltage. *Example: If you want the battery to stop output when voltage drops below 11V, and resume output when voltage rises above 11.6V: Double-click "+" to set cut-off voltage to 11, wait for the LED to stop flashing, then double-click "-" to set the difference value to 0.6V.*

### Notes 1. The product photo is for reference only, please refer to the description for actual size information. 2. Please allow 1-2mm size error due to manual measurement, thank you for your understanding. 3. Actual color may vary slightly from the image due to different monitor settings. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.