Clear epoxy adhesive is widely used in repairs requiring a colorless, invisible joint/fill or where repair time should be reduced to a few minutes. Due to its high resistance to electrical breakdown, it is used for bonding and encapsulating electronic components to protect them from moisture, dust, dirt, and other contaminants. Clear Epoxy Adhesive is used to bond glass, wood, stone, plastics, rubber, metals, metal alloys, and combinations of these materials. It is most often used in: jewelry (e.g. for bonding amber with gold or silver), electronics for gluing elements, households for emergency repairs. Features and benefits: solvent-free, fast cross-linking time, two-chamber syringe precisely doses ingredients, eliminating losses, colorless, creates an invisible joint, universal, has high resistance to electrical breakdown, resistant to water and temperature, resistant to aggressive chemical factors (acids, alkalis, solvents, gasoline) and operating fluids, after drying, it can be mechanically processed (grinding, drilling, threading), safe to use, repairs in a few minutes, connects metals, ceramics, plastics, suitable for gluing electronic components, for indoor and outdoor use, for industrial applications, allows for the reconstruction of damaged threads and elements. Parameters: Color: colorless, Pot life after mixing: 1 min., Initial hardening: 8 min. (at 20°C). Curing time: 12 h. Shear strength: 11.5 MPa. Temperature resistance: -30°C to 80°C. Shelf life: 36 months. Directions for use: Sand the surfaces to be joined with sandpaper or a file. Squeeze out the appropriate amount of components and mix thoroughly until a uniform color is achieved. Apply the prepared mixture to one of the surfaces. Press the components firmly together and leave them immobilized until the adhesive is fully cured. Before mixing the components, warm the product to room temperature. Do not mix more components A and B than can be used in 1 minute (pot life). Repair time can be shortened by directing a stream of warm air at the joint. Do not use for joining/filling PP, PE, and PTFE.