Self Adhesive COB LED Neon Strip Light WIFI/Bluetooth/Touch with 23key Remote 220V 240LED IP67 Linear Lighting IC Silicone Rope

Luminous Flux : 249-2000 High-conrned chemical : None Is Smart Devi : Yes Power Generation : Touch Is Batteries Included : no Nominal Voltage : 220V Average Life (hrs) : 50000 rtification : ,,CCC,FCC Power Sour : AC

: Mainland China Strip type : COB Item Type : Strip AHADA Voltage : 220 V LED Chip : Epistar Waterproof : Yes Occasion : Garden

Noti 1. The input voltage of this product is AC110 / 230V 2. Our company won’t be responsible for any damage of the controller due to any wrong operation.

Kindly note : (1) When you order more than"25m"  item, we will ship them to you viaDHL/UPS/Fedexor other , if there areany duty and Vat , please pay them,thanks, (2)There is adhesive on the back, No fixed clips (3) Led strip must be light up after unfolded completely , do not light up in a roll,otherwise it will melt and do not work, which may cause safety problem. (4) Before you want to make a dispute,  frist,we will do our best to resolve it !

Specifications： Material: Silicone+LED Control type: Wifi APP/ Bluetooth APP/ 23Keys IR / Wall Touch RF remote control Input voltage: AC220 -240V(EU Plug) LED type: COB Material: Milk Silicone Tube LED quantity:  240Leds/m, high brightness!! Waterproof rate: Waterproof IP67, can be used indoors / outdoors. Tube Size: 10mm * 6mm Light Color: Cold white(6000-6500k), warm white(3000-3500k), natural white(4000-4500k) 23keys IR remote powered by: 2*AAA Batteries (not included) IR remote distan: about 8-10m Bluetooth remote distan: about 8-15m Wifi remote distan: about 15-30m RF remote distan: about 15-30m Wall Touch Remote control distan: 5-20m (RF433 touch panel remote control) RA (CRI): >90 Operation temperature: -20℃-+60℃ Storage temperature: -20℃-+60℃ Dimmable: YES Life Span: > 50000 hours Widely used in hotels, bars, KTC, homes 23key Remote Kit usage instructions: Using infrared remote control, the brightness can be adjusted remotely and a delay shutdown can be set. 1. Insert the light strip plug into the output socket of the controller. The positive and negative poles of the controller and the light strip should correspond. Pay attention to check whether there is a short circuit at the pin position of the light strip. If there is a short circuit, please fix it before powering on, otherwise the controller and the light strip will be damaged. Light strip. 2. The power plug is energized and the remote control is used to control the controller to work as needed. 3． When installing the controller, install the remote control reiving tube in a location without obstacles to avoid remote control failure. Bluetooth 23key Kitusage instructions: Using 23-key remote control and mobile phone Bluetooth APP control, the brightness and speed can be adjusted remotely, and a delay shutdown can be set. Comes with a built-in microphone, and the lights can change according to the rhythm of the music in music mode 1. Scan the product QR code to download and install the APP. APP name: Trick Light. Applicable mobile operating system: IOS version 6.0 or above or Android version 4.3 or above. Software language: English, Chinese. The language is automatically recognized according to the mobile phone operating system. 2. Open the Trick Light APP on your mobile phone and connect the light strip to the dimmer (the positive and negative poles of the controller and the light strip must correspond. Pay attention to check whether there is a short circuit at the light strip position. If there is a short circuit, please deal with it before powering on, otherwise the controller will be damaged. and light strip), when the power plug is powered on, the software will automatically scan for Bluetooth devis and automatically connect to the devi. Use the APP or remote control to control the controller to work as needed. 3． When installing the infrared controller, install it in a location without obstacles to avoid remote control failure; RF wireless radio frequency remote control can remotely control objects.

Wifi 23key Kit usage instructions: The infrared 23-key monochrome Tuya wifi controller adopts the wifi wireless intelligent remote control LED controller. You can use the smartphone APP to control the light mode, or you can use the infrared 23-key remote control to control and change the dynamic mode of the light and adjust the brightness of the light strip.Used to adjust the brightness of single-color light strips, with 8 dynamic flashing functions and scheduled shutdown 1. Scan the product QR code to download the APP and register an account. 2. Connect the controller and LED light strip and turn on the power. 3. Open the Tuya Smart APP on your mobile phone and click to add a devi. (Reset the devi, turn the power on and off 3 times, on-off-on-off-on, and enter the flash state to configure the network. Please complete the network configuration operation within three minutes.) Select Lighting→Light Strip→Confirm that the indicator light is flashing quickly. Enter the WIFI account and password → Confirm → The connection is added sucssfully → Click Finish to complete product matching. 4. Enter the five parts of the APP main interfa: power on/off, white light brightness adjustment interfa, sne, plan, and settings. ①Enter the white light color ring interfa to adjust the light brightness. ②Enter the sne interfa to freely choose different snes, and the snes can be edited and set. For example, the lighting mode can be set to static, jump, breathing, etc. The changing speed is adjustable and the sne can be named freely. ③ Enter the planning interfa (you can select the timing type, fall asleep and wake up) ④ Enter the setting interfa to perform timing (turn off the lights, turn on the lights, turn on the lights and dimming, turn on the lights and set the sne), countdown (delay to turn off the lights), and power-on response. 5. It can be controlled through smartphone APP and intelligent voi control, and can also be controlled with an infrared 23-key remote control. The single-key control of 8 dynamic modes is simple and clear, and has power-off memory, which is convenient and practical and avoids repeated settings. Wall Touch Kit usage instructions: The high-end RF wireless 86 panel touch high-voltage single-color dimmer is used to control various single-color LED light strips, single-color neon light strips, etc.; it has the advantages of convenient wiring and simple use; it can realize jump and change according to the actual needs of customers. Gradient, flashing and other light changing effects Product coding and clearing instructions: Coding (one-to-one control): Within 5 seconds after the controller is powered on, press and hold the night light button, and the light will flash slowly 3 times. Code clearing (one-to-many control): Within 5 seconds after the controller is powered on, press and hold the brightness button, and the light will flash 3 times. Package Includes: Wifi 23key Remote Kit： 1 x COB LED light strip 1 x 23key IR remote control 1 x 750W WIFI controller with EU power plug

Bluetooth 23key Remote Kit: 1 x COB LED light strip 1 x 23key IR remote control 1 x 750W Bluetooth controller with EU power plug

Wall Touch Remote Kit: 1 x COB LED light strip 1 x Wall Touch RF remote control(CR2025 button battery needs to be installed) 1 x 750W led controller with EU power plug

23key Remote Kit: 1 x COB LED light strip 1 x 23key IR remote control 1 x 750W led controller with EU power plug (Note: Excluding remote control batteries and mobile phones.)