Transceiver module QSFP+ 40G 2km Compatible The QSFP+ 40G LX4 Transceiver module is designed for data transmission using TWO SINGLEMODE FIBERS and supports data rate of 40Gb with maximum range of 2km on singlemode fiber or 150m on multimode fiber. Operates on 4x10Gb/s CWDM wavelengths: 1271, 1291, 1311, 1331nm and has a LC/UPC DUPLEX optical connector. MSA compliant. Transceiver module QSFP+ 40G LX4 | 1310nm | SMF/MMF | DDM | LC | 2km/150m | 40GBase-LX4 | Compatible Application for transceivers QSFP+ LR4 modules You can transmit data over both multi-mode and single-mode optical fiber You realize transmission up to 2km over single-mode fiber and up to 150m over multimode fiber You save fiber - this model needs only 2 multimode fibers to transmit the signal, not 8 as in the case of standard QSFP+ multimode modules with MPO connector Basic Parameters - Technical Specifications LO-QSP-40G-LX4 - QSFP+ 40G LX4 transceiver 1310nm LC DDM MM/150m or SM/2km: Model LO-QSP-40G-LX4 Manufacturer LightOptics Transceiver Type QSFP+ Standard/Protocol 40GBASE-LX4 Ethernet Transmission Speed 40Gb/s (4x10Gps) Wavelength 1271, 1291, 1311, 1331nm (CWDM) Fiber Type Singlemode Fiber (SMF) and Multimode Fiver (MMF) Connector Type Duplex LC/UPC Distance for single-mode fibers 2 km, for multimode fibers 150m Diagnostic Feature DOM/DDM (Digital Diagnostic Monitoring) Standards / Compliance MSA (Multi-Source Agreement) Operating Temperature 0 °C to +70 °C Diagnostics of your Network The DDM diagnostic module enables real time monitoring of the operating parameters of your transceiver, for example, the input and output optical power, temperature, voltage or current. Be in control over your network and prevent malfunctions thanks to quick and easy diagnosis of the network, with no additional equipment needed. To get access to the DDM diagnostics, both the transceiver and the device must possess the DDM function, sometimes called DOM (nearly all managed devices are equipped with this function). Proven quality, rigorous testing High quality and repeatability for the safe and steady operation of your network – that's our goal. The compatibility of the module is the effect not only of its programming, but also of the high standards of the production process. Our engineers adapt the transceivers to work with various networking devices, and ensure their seamless detection in switches, routers, servers or interface cards. The reliability of the transceivers is proven with thorough testing. LightOptics modules are perfect for devices such as switches, converters, routers or servers from the majority of manufacturers available on the market, thanks to our adaptability to new products and changing software.
Товар из Польши
Возврат по недоставке
