NANO-BAU FASADA PROTECT H100 plaster impregnation 10L

NANO-BAU FASADA PROTECT H100 plaster impregnator is a colorless protective agent based on innovative nanotechnology, designed for long-term facade protection. This product effectively protects acrylic, silicone, silicate, and mineral plasters against moss, dirt buildup, moisture, rain, weathering, and microbiological factors. It works thanks to an ultra-thin, nanometric protective layer that remains invisible to the naked eye, while simultaneously repelling water and blocking its penetration into the plaster structure. This solution combines durability with aesthetics, guaranteeing a consistent appearance, vapor permeability, and protection for years! How it works: The impregnator uses silicon nanoparticles that permanently bond to the plaster surface, creating a hydrophobic nano-coating. This invisible barrier not only repels rainwater but also reduces the buildup of dirt, soot, and organic compounds. Additionally, it protects against the growth of algae, moss, mold, and fungi, eliminating the risk of gray or green growth. Hydrophobic impregnation prevents rainwater from soaking into the walls, which helps maintain the building's thermal insulation. Thanks to its self-cleaning properties, the surface easily sheds dirt, making maintaining the plaster easier than ever! Groups of substrates for NANO-BAU FASADA PROTECT H100 plaster impregnator: Plasters (mortars and facade coatings): plaster, acrylic, decorative plaster, mosaic plaster, mineral plaster, structural plaster, silicone plaster, cement-lime plaster Decorative and structural paint Decorative and construction materials (concrete, stone, brick, tiles): decorative concrete, decorative stone, brick, clinker tile, wall brick, decorative brick, wall bricks, natural gypsum and concrete, old brick The NANO-BAU FACADE PROTECT H100 product comprehensively protects all the groups mentioned, guaranteeing lasting protection against external factors! ADVANTAGES OF NANO-BAU FASADA PROTECT H100 plaster impregnator: EFFECTIVE PROTECTION AGAINST WATER AND DIRECTING: The ultra-thin hydrophobic layer repels rain, snow, and dirt, preventing moisture penetration and dirt buildup. MULTI-YEAR PROTECTION (MIN. 6 YEARS): Durable silicon nanoparticles ensure long-lasting effectiveness, even in extreme conditions. ANTI-FLAILING AND UV PROTECTION: Protects against degradation caused by rain, UV radiation, and freeze-thaw cycles. INCREASED FROST RESISTANCE: Hydrophobic treatment reduces damage related to freezing, which is crucial in winter. LASTING SUPERHYDROPHOBIC EFFECT: The surface repels water and dirt, operating on a self-cleaning principle. VAPOR PERMEABILITY: Innovative technology preserves natural gas diffusion without blocking water vapor exchange. RESISTANCE TO MOSS AND ALGAE: A dry substrate eliminates conditions for microorganism growth, maintaining the aesthetic appearance of the facade. IMPROVED THERMAL INSULATION: A dry facade minimizes heat loss, increasing the building's energy efficiency. LASTING AESTHETIC EFFECT: Prevents plaster from darkening, maintaining a like-new appearance for years. RESISTANCE TO UV AND EXTREME TEMPERATURES: Withstands fluctuations from -30°C to +80°C and solar radiation without losing its properties. PROTECTION AGAINST MOISTURE: An invisible protective layer blocks water from penetrating the plaster structure, protecting against corrosion and mold. Coverage: NANO-BAU FASADA PROTECT H100 is very effective, making it the ideal solution for all types of mineral facades. Consumption is approximately 40 to 60 ml per m². Below are approximate coverage data depending on the product capacity: 1 liter: Covers 16.7 to 25 m² 5 liters: Covers 83.3 to 125 m² 10 liters: Covers 166.7 to 250 m² Thanks to this coverage, NANO-BAU FASADA PROTECT H100 provides optimal protection and effective coverage of entire mineral facade surfaces. Instructions for use for NANO-BAU FASADA PROTECT H100: Recommended application tools: garden sprinkler, paint sprayer (HVLP), brush or roller. Surface preparation: Cover glass and metal surfaces with foil to prevent dirt. If dirty, clean them as soon as possible. The surface should be clean and dry before applying the product. Preparation: Shake the container thoroughly before use – do not dilute. Application: Evenly apply the impregnation to the plaster surface to slightly dampen it. Apply one or two coats using the wet-on-wet technique, depending on your needs. Drying time: After applying the impregnation, allow the plaster to dry for approximately 3 hours. Efficacy test: Once dry, test the effectiveness of the impregnation by pouring water on the surface. If the water beads on the surface and does not soak into the plaster, the hydrophobic impregnation is effective.