RTX Reversing Parking Sensors Front Rear Slim Led

If you're looking for the cheapest parking sensors, unfortunately, we don't have them... But if you're looking for a proven product, something that will last for years after installation, you've come to the right place! Our sensors have been installed by authorized dealers of leading car brands and many dealerships for several years, enjoying excellent customer reviews. RTX brand parking sensor set, model PA2-59-8 Reliable parking sensor set with 8 new generation sensors and an exclusive "slim" LED display designed for mounting on the front and rear of the vehicle elegant low-profile , readable LED display automatic activation of the front sensors after pressing the brake long measuring range distance - up to 1.8m display resolution distances every 10cm sensitive detection even thin posts and fence mesh built-in siren with the ability to turn off the sound 5 different sound signaling frequencies modern sensors with oblique transducers no need to use angled washers sensors have detachable cables for easy installation sensors diameter 22.5 mm Elegant display fits perfectly into the interior of any car It has a built-in sound indicator with the ability to turn the sound off When it is on, its readings are very legible When turned off, it is a discreet accessory Distance indications are presented on discreet LED display of small dimensions. The LED strip indicates the location of the obstacle in relation to the vehicle The audible signal can be conveniently turned off How does it work? Parking Assistant makes it easier to move and park the vehicle by indicating the distance to an obstacle and its position relative to the vehicle. When driving forward the display automatically turns on each time you press the brake and remains active for approximately 15 seconds. After this time, the indicator turns off to avoid distracting the driver when, for example, standing behind another vehicle. If you need to re-measure the distance, simply press the brake again. When driving backward the display turns on when you engage reverse gear. The distance is displayed, and the built-in beeper signals the approach to the obstacle with a sound - the frequency of the signal increases as the obstacle is approached. The display indicates the distance from the obstacle with a resolution of 0.1m The frequency of the signal increases as you approach the obstacle The signal generates 5 different sound frequencies which allows you to easily assess how far you can reverse At a distance shorter than 30cm, a continuous sound signals the need to stop the vehicle The sensors have detachable cables. The ability to disconnect the cable facilitates installation, and in the event of sensor damage, its replacement does not require disassembly of the entire wiring. The connection point is sealed with a silicone O-ring, and the entire screw-on connector - moisture-resistant, solid solution. Front sensor cable length: 7 meters Rear sensor cable length: 2 meters The sensors have a slim collar , thanks to which they look nice in the bumper, and rubber protrusions on the side of the body expand when pressed into the bumper, thanks to which the sensors hold firmly and permanently. Tilting the transducer 12 degrees upwards relative to the sensor's mounting plane perfectly replaces the silicone angle washers used in older, flat sensors. If necessary, by rotating the sensor, the angle of the emitted ultrasound beam can be appropriately corrected. This ensures universal use both in vehicles with high and low bumpers. The set includes a hole saw with a diameter adapted to the dimensions of the sensors. You can easily make aesthetic holes in literally a few minutes Set contents: control unit LED display 8 sensors hole saw wiring Set designed for vehicles with 12V installation