Diamond drill bit for ceramics, tiles, stoneware, glass for a TITANIUM CERAMIX screwdriverIndex: WGD0601001TECHNICAL DATA ⭐ Drill diameter (mm): 6⭐ Total drill length (mm): 54⭐ Holder: Cylindrical (fits any screwdriver, drill, drill-driver without impact)⭐ Diamond embankment height (mm): 3⭐ Operation: Wet without impact (water cooling e.g. with a sponge or special drilling gel)⭐ Intended use: Drilling without impact in glazed stoneware, ceramics, glass, natural stone, tiles⭐ Maximum drilling depth (mm): 33⭐ Side hole for cooling and dust removal: Yes⭐ Body material: Steel⭐ Pack quantity: (pcs): 1 TITANIUM CERAMIX Wet Drilling Diamond Core Bit ✅ Diamond coating - the cutting edges are covered with microscopic diamond particles electroplated. This allows the hole saw to effectively abrade material, ensuring smooth and precise cuts without splintering. ✅ Durable steel construction - the body is made of thick, resistant steel, ensuring stability during operation, effective heat dissipation, and exceptional tool durability - ideal for professional applications. ✅ Universal cylindrical chuck - the hole saw is equipped with a practical chuck that fits any drill/driver/drill/driver without impact. The quick-release system allows for rapid assembly and disassembly without additional tools. ✅ Wet operation - the drill bit is suitable for use with water cooling. This significantly extends its service life, making it ideal for intensive use. ✅ Practical side hole - selected models feature a side hole that facilitates cooling and debris removal during drilling, increasing work comfort and efficiency. ✅ Packaging - the hole saw is supplied with a plastic case for easy storage. ➡️ The TITANIUM CeraMix hole saw series consists of drill bits from 4mm to 40mm in diameter. We invite you to view other diameter sizes in our auctions. INTENDED USE: ➡️ TITANIUM CeraMIX diamond hole saws are professional tools designed for tilers, installers, electricians, plumbers, renovation crews, and advanced DIY enthusiasts. ➡️ They are perfect for applications where precision, durability, and a perfect finish are essential. Thanks to its exceptional hardness and high-quality workmanship, the tool is ideal for wet drilling without impact, creating precise, smooth holes in exceptionally hard materials such as stoneware, ceramics, porcelain, marble, granite, glass, natural stone, and brick—where standard drill bits fail. This indispensable tool for construction, finishing, and installation work guarantees clean edges without chipping or cracking. Choosing the TITANIUM CeraMIX diamond hole saw guarantees maximum precision and work safety even in the most challenging conditions. APPLICATIONS ✴️ Drilling holes without impact in stoneware, ceramics, and porcelain ✴️ Installing electrical sockets, faucets, valves, and pipes ✴️ Creating installation penetrations in tiles ✴️ Use in bathrooms, kitchens, and when installing large-format tiles ADVANTAGES ⭐ Precise and smooth holes - the diamond cutting edge combined with the ability to work wet guarantees perfectly smooth, clean holes without chips or cracks. This ensures a perfect finish in any material. ⭐ Faster and more efficient work - high drilling efficiency in hard surfaces translates into significant time and energy savings during renovation, assembly, and finishing work. ⭐ Exceptional durability and wear resistance - the solid steel body and diamond coating ensure long tool life, even with intensive use. This is an investment in equipment that will last for years. ⭐ Easy and intuitive operation - hole saws are simple to use and require no specialized training. All you need is a standard drill, water for cooling, and familiarization with the manufacturer's recommendations/user manual. ⭐ Wide range of sizes - TITANIUM CeraMIX offers a wide range of diamond drill bits (from 4mm to 40mm diameter), allowing you to find the right size for any task - from small holes to larger installation penetrations. MANUFACTURER'S RECOMMENDATIONS Proper use of diamond hole saws is crucial to maintaining their durability, efficiency, and safety. Following the rules below will allow you to fully utilize the tool's potential and avoid premature wear. ⚠️ Use water cooling - always use water or another cooling fluid (e.g., drilling gel). Cooling lowers the tool's temperature, protects the diamond coating from overheating, and significantly extends the life of the hole saw. This is especially important for long-term drilling in hard materials – it guarantees a stable, precise cut and minimizes the risk of damage. Maintain optimal speed – the recommended drill speed is 300 to 800 rpm (it is recommended to stick to the lower speed range). Do not exceed these values – excessively high speeds can cause the tool to overheat and shorten its life. Maintaining the appropriate speed ensures clean, accurate holes and longer durability of the diamond coating. Drilling in hard materials should not be done quickly, but patiently. Drill without impact – this negatively affects drilling quality (chipping, chipping, etc.) and may shorten the life of the drill bit. MOST COMMON ERRORS WHILE WORKING❌ Lack of water cooling - the surest way to burn the drill bit, which will result in a black coating on the segment and the inability to continue drilling.❌ Too much pressure - causes faster abrasion/chipping of the diamond. The result? Shortened lifespan of the hole saw.❌ Too high RPM - overheating and rapid diamond wear. The result? Overheating, a black coating on the segment, and shortened lifespan of the drill bit.❌ Incorrect positioning of the hole saw in relation to the material - lateral run-out damages the diamond and increases the risk of uneven and unsightly drilling. Possible chipping.❌ Hammer drilling. INSTRUCTIONS FOR USE: To ensure safe and efficient work and proper care of the product, follow these steps:✔️ Prepare the work area and tool. Ensure that the work area is clean and stable. Check the drilling area for electrical wires or pipes (use a detector). Attach the hole saw to the drill/driver without impact, making sure it is securely seated in the chuck. Put on personal protective equipment: goggles, earphones, gloves, dust mask. ✔️ Cooling preparation: Prepare water or a suitable cooling liquid. You can use a spray bottle, a wet sponge, or a water spray - the drilling surface should be constantly moistened to prevent the tool from overheating. ✔️ Starting drilling: Start drilling carefully, positioning the hole saw at an angle of approximately 30°-45° to the surface. This start helps stabilize the drill bit and prevents it from slipping on slippery material. Once the diamond edge begins to effectively abrade the surface, gradually straighten the tool to a vertical position and continue drilling with a steady motion. ✔️ Drilling: Maintain a constant water supply. Operate at a low to moderate speed – the recommended range is approximately 300-800 rpm. Do not overheat the drill bit. If drilling deeply, periodically pull the hole saw out slightly to remove the drill bit. Do not apply excessive pressure – let the drill bit do the work itself. ✔️ Finishing the job: Clean the tool and check the diamond coating. After drilling, remove any remaining material and let the tool cool. On models equipped with a side hole, removing the remaining material is even easier and faster (e.g., you can use a screwdriver).