Set of diamond hole saws for stoneware tiles 6-14mm M14 TITANIUM

Diamond hole saw set for TITANIUM CeraMax stoneware tiles Index: T010020 TECHNICAL DATA ⭐ Drill diameter in the set (mm): 6 / 8 / 10 / 12 / 14 ⭐ Thread: M14 (fits any angle grinder with M14 thread) ⭐ Drilling: Dry (without water) ⭐ Application: Drilling in ceramic tiles, stoneware, glaze, natural stone, clinker, marble, porcelain ⭐ Expected lifespan by the manufacturer: 15-40 holes (depending on the hardness of the material and compliance with the manufacturer's recommendations) ⭐ Diamond embankment height: 10 mm ⭐ Maximum drilling depth: 35 mm ⭐ Recommended rotational speed when drilling: up to 11000 rpm ⭐ Wax to improve cooling: Yes ⭐ Material of manufacture Body: Steel⭐ Packaging: Carrying case with a sponge insert and a closing buckle⭐ Number of pieces in the set (pcs): 6 TITANIUM CeraMax Diamond Hole Saw Set for Angle Grinders✅ The TITANIUM CeraMax diamond hole saw set is the perfect choice for contractors, tilers, and DIY enthusiasts who expect the highest precision and durability when drilling in hard materials.✅ Thanks to the high-quality, vacuum-brazed diamond coating, the drill bits effortlessly cut through stoneware, ceramics, marble, porcelain, natural stone, and clinker - without the use of water, which significantly facilitates work on any construction site. Perfect for drilling for expansion plugs.✅ Each drill bit contains cooling wax that melts during drilling, improving drilling dust removal, lowering the drill bit temperature, and extending its lifespan by up to 15–40 holes (depending on the material hardness). This solution sets the CeraMax series apart from standard core drills. The universal M14 thread allows you to mount the hole saws directly on any angle grinder. Additionally, the set includes an M14 adapter, so you can also use them with drills and screwdrivers – complete flexibility in one set. The drill bits are made of high-quality steel, and the entire set is packed in a practical case with a foam insert, ensuring all components are protected and always at hand. This set significantly improves work, speeds up drilling, and ensures professional results from the very first use. The TITANIUM CeraMax series covers diameters from 6 mm to 85 mm. We invite you to check out the other sizes available in our auctions. The TITANIUM CeraMax hole saw set is packaged in an elegant, sturdy case with a foam insert, making it a perfect gift. Perfect for Christmas, St. Nicholas Day, Father's Day, Boy's Day, birthdays, name days, or any other occasion. Practical, aesthetic, and ready to give - a gift that will really come in handy. SET CONTENTS: 6 mm Diamond Hole Saw with Wax, 8 mm Diamond Hole Saw with Wax, 10 mm Diamond Hole Saw with Wax, 12 mm Diamond Hole Saw with Wax, 14 mm Diamond Hole Saw with Wax, M14 Adapter for Screwdriver/Drill, Carrying Case with Sponge Insert and Closing Clamp, MANUFACTURER'S RECOMMENDATIONS: Use this hole saw only for dry drilling in stoneware tiles, ceramics, glazed tiles, and porcelain. Do not drill into concrete or masonry, as it will immediately dull.⚠️ Operate at 8000-11000 rpm.⚠️ Start drilling at a slight angle (approx. 15-30°), then gradually straighten the drill bit to stabilize the position.⚠️ Take short breaks - stop working every few seconds to cool the diamond segment with air and remove the drill bit dust from the hole.⚠️ Do not press too hard while drilling, as this increases the temperature and wears down the diamond coating. ‼️ MOST COMMON ERRORS WHILE WORKING❌ Too much pressure - the diamond doesn't require force, only constant, appropriate speeds.❌ Drilling without a break - leads to overheating of the segment and its rapid wear.❌ Starting drilling at full speed perpendicular to the tile, which often results in its cracking.❌ Attempting to drill in concrete, metal, or wood.❌ Failure to clean the segment after use - baked-on dust shortens the life of the diamond. ✴️ INSTRUCTIONS FOR USE: Put on safety glasses and gloves - optionally also a dust mask. Mount the hole saw on an angle grinder. Mark the drilling point. Set the drill at an angle of 15-30° and start working at medium speed. After "catching" the point, gradually straighten the drill to a vertical position. While drilling, make circular movements without applying excessive pressure. Pause every few seconds to cool and clean the segment. Clean the hole saw after drilling.