AC 220V COB Strip 240Leds/M IP65 Waterproof 3000K 4000K 6000K Flexible Ribbon Rope LED Light 10CM Cut Self Adhesive Diode Tape

Luminous Flux : 249-2000 High-conrned chemical : None Power Generation : Always On Is Batteries Included : no Nominal Voltage : 220V Model Number : AC 220V COB Strip 240Leds/M I Average Life (hrs) : 65000 rtification : UL,CCC,,GS, Power Sour : AC

: Mainland China Strip type : COB Occasion : Living room Specifications (light beads / m) : 240 Item Type : Strip ISUFU Voltage : 220 V LEDs Number/M : 240 LED Chip : Epistar Waterproof : Yes Color Temp(K) : 3000K/4500K/6000K 1 : 220V Led Strip High Brightness 10 : 3000K/4500K/6000K 4 : Driver Build In 10CM Can Be Cut 5 : Self Adhesive Tape 6 : COB LED Strip Light with Adhesive Tape 7 : 240LED 8 : 220V 9 : 2pin Wire(NO Plug)

The Black Friday sale is here, please hurry up and order, if you miss it, you will have to wait a year~~~

When using light strips, you need to pay attention to the following: ‌1. Installation environment‌: Make sure the installation location is dry and clean, and avoid installing in a humid or dusty environment to avoid affecting the performan and life of the light strip‌ 2‌. Voltage adaptation‌: Choose an appropriate power supply according to the rated voltage of the light strip to avoid damage to the light strip due to too high or too low voltage. ‌3. Heat dissipation problem‌: If the light strip works for a long time, attention should be paid to heat dissipation to avoid heat accumulation that may lead to aclerated aging or failure of the light strip. ‌4. Fix firmly‌: The light strip must be fixed well during installation to prevent loosening and falling off‌. ‌5. Avoid exssive bending‌: Exssive bending may damage the circuit inside the light strip. Pay attention to the bending radius requirements of the light strip‌1. ‌6. Fire safety‌: Especially when installing near flammable items, make sure that the light strips do not cause fire hazards‌. ‌7. Reliable connection: The connection between the light strips must be stable and reliable to prevent problems such as flickering or non-lighting caused by poor contact. 8‌.Waterproof treatment‌: If used outdoors or in humid environments, do not waterproof the plug in plas with water to prevent electric shock. 9. Usage specifications: Follow the instructions and operating specifications of the light strip, and do not disassemble or modify it at will. Specifications: Product Name: 220V COB Led Strip Light Adhesived With 2Pin Wire Input voltage: AC220-240V Number Of Leds: 240LEDs/m Cut Length: 10cm Light Color: Warm White (3000-3500K), White (6000-6500K), Natural White (4000-4500K) Power: 8-10W/m Front connector cable (20CM long) Strip size: W10mm X H5mm Beam Angle: 180 degrees Waterproof rating: IP65 waterproof(Can be used outdoors) Note: The light strip cannot be immersed in water, power plug away from water.) How to use light strips correctly？ 1. Make sure the surfa of the adherend is clean, dry and free of oil. For different properties of adherends and different situations, dust, oil stains, rough surfas, moisture, etc. can be treated. to ensure the adhesive adheres well ‌2. Paste the corresponding pla promptly and accurately Align the position on and do not move it wrongly. Pressurize to remove the air and make them in close contact. 3. The pasting pla needs to be relatively pasted on a relatively smooth surfa. After pasting, it needs to be fixed in time and pressed a few times. Features: *This is the est AC COB strip light, Ultra-thin 10mm width, fixed with double-sided adhesive, do not need to snap fixed, easy to install. *High density COB, linear lighting, high brightness, uniform lighting, no light spot, high color rendering index CRI90+, protect your eyes，good quality, suitable for engineering decoration.

Package Includes: 1 x COB Led strip light With 2Pin Wire

Note : (1) When you order more than "40m" COB light strip,we will ship them to you via DHL/UPS/Fedex or other , if there are any duty and Vat , please pay them, thanks, (2)COB strip light come with 1pc power plug, come with strong adhesive on the back, no fixed clips. (3)Led strip must be light up after unfolded completely, do not light up in a roll, otherwise it will melt and do not work, which may cause safety problem. (4) Before you make a dispute, and customer servi in this store will respond within 24-48 hours.