Luminous Flux : 249-2000
High-conrned chemical : None
Is Smart Devi : no
Is Batteries Included : no
Nominal Voltage : 6v
Average Life (hrs) : 65000
rtification : ,,,CQC,SAA,UL,,CCC,FCC,GS,,pse
: Mainland China
Strip type : COB
Power Consumption (W/m) : 8.64W/m
Specifications (light beads / m) : 320
Item Type : Strip
ISUFU
Voltage : 5V
LEDs Number/M : 320
LED Chip : Epistar
Waterproof : No
Color Temp(K) : 2700k-8000K
Occasion : Bedroom
Name 1 : 3AA Motion Sensor COB LED Strip
Name 2 : 3MM 5MM 8MM COB LED Strip
Name 3 : 3AA Motion Sensor Battery Box Power COB
Name 4 : 5V 3AA Motion Sensor COB LED Strip
Specification:
Name:PIR Sensor COB Led Strip With 3AA Battery Box
Working voltage: DC 5V
LEDs quantity: 320leds/m
Emit color: white/warm white/natural white(Red/Blue/Green/I blue/Golden yellow/Pink)
Color temperature: warm White 3000-3500K, natural white 4000-4500K, white 6000-6500K
Waterproof grade: IP21 non waterproof
COB width: 3mm 5mm 8mm
RA (CRI): >90
Length: 0.5m, 1m, 2m, 3m, 4m, 5m
Luminous flux: 80-100LM/M
Operation temperature: -20℃-+45℃
Storage temperature: -20℃-+60℃
View angle: 120°
Main shell dimensions: length: 68 mm, width: 45 mm, total thickness: 18 mm
Battery Compartment Dimensions Internal slot length: 50mm, slot width 15mm
Total length of external output wire: 150mm (15cm)
Features:
Super bright and very balan soft lighting.
Much more flexible and bendable than any other SMD LED strips.
Can be cut or jointed by different length.
High CRI for better lighting effect.
High luminous efficacy, save power!
With adhesive tape on the back, easy to install.
Application snarios
Can be used in bedrooms, kitchens, bookcases, wardrobes, desks, etc.
Package included：
3AA Battery Box PIR Sensor :
1x COB Led Strip(3mm/5mm/8mm PCB)
1x 3*AA PIR Battery Box (battery not included)
How to use
1. After connecting and installing the battery, when the human body is close to the sensing area, the light bar will light up automatically.
2. After the human body leaves, it will automatically turn off after a delay of tens of seconds (the delay time of different sensing modules is slightly different).
3. Some induction cartridges have mode switches:
Human body sensing mode: the light turns on when someone comes, and turns off when someone leaves.
Always on mode: Continuously lit (if you need to turn it off, you need to disconnect the battery or unplug the connector)
Installation steps
1.Install the battery
Open the back cover of the battery box, insert 4 No. 7 (AAA) batteries (additional purchase required) according to the positive and negative polarity marks, and close the back cover tightly.
2. Connect the light strip
Insert the DC male connector on the light strip into the corresponding DC female connector on the battery box and plug it tightly.
3. Fix the light bar
The back of the bare board light strip can be directly pasted on a clean, dry, flat surfa; if it needs to be stronger, it can be fixed with a tie/glue.
Troubleshooting:
1. The light does not light up: Check the positive and negative poles of the battery, battery power, and whether the DC connector is tightly plugged in.
2. Always on: Cover the sensor head, check the sensor mode switch, or repla the battery and try again.
3. Part of it does not light up: the light strip circuit is damaged, avoid bending and squeezing.
About Q&A
1. Is it waterproof? Can it be used outdoors?
-This is a non-waterproof COB and is not suitable for outdoor use. There is another style in the store for outdoor use. You can contact our customer servi to send the style
2. Can the battery always maintain brightness?
-As long as the battery is sufficient, the light strip will remain bright
3. How to fix the light strip?
-It can be fixed by sticking it to a smooth surfa without water droplets and dust.
4. How long is the light strip?
-0.5M 1M 2M 3M 4M 5M, you can choose
5. How many colors does the light have?
-There are 9 monochrome light strips that cannot be dimmed. White Red Green Blue Pink Natural Warm Red Yellow I Blue
6.What is the differen between 8MM PCB light strip and 3MM 5MMPCB light strip?
-8MM PCB means that the width of the light strip is 8MM, which is larger than the width of 3mm and 5mm, and the brightness will be brighter. Due to the difficulty of prossing,
the 8mm pcb light strip is less difficult, so the pri is also cheaper
Возврат по недоставке
