TONE Torque Checker Socket Sizes 500 TTC-500, 9.5mm, 12.7mm, 19.0mm, & 25.4mm (3/8", 1/2", 3/4", & 1"), Black, N m

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Across flats: 25.4mm Dimensions: Width 205mm x Depth 173mm x Height 85mm Weight: 2.6kg *Weight does not include the conversion adapter or AC adapter. Accessories: Conversion adapters x 1 each (9.5mm female x 25.4mm male / 12.7mm female x 25.4mm male / 19.0mm female x 25.4mm male), hexagonal male adapters x 1 each (27mm male x 25.4mm male / 38mm male x 25.4mm male), AC adapter (100-240V / 50-60Hz), hexagonal socket head bolts M10 x 45 cap bolts (including washers and nuts) x 4, instruction manual, calibration certificate (with traceability diagram) Capacity range (minimum to maximum) (N・m): 20 to 500 Minimum display (N・m): 0.0 Scale division (N・m): 0.1 Measurement method: Right rotation direction (clockwise) Accuracy (%): ±1% + 1 division Three measurement modes: Track mode: Displays torque value in real time. Peak mode: Displays peak hold value and shows zero after a certain period of time. Peak hold mode: Displays the tightening peak. Repair and Inspection: Accuracy may be affected by rough handling, long-term storage, or frequent use. Regular calibration is necessary to maintain accuracy. We recommend calibration at least once a year (charges apply). Repair and inspection are necessary if the display is damaged, malfunctioning, or if numerical deviations persist even under no load (charges apply). *Repair may not be possible depending on the extent of the damage.