Makita TD173DZB Impact Driver 18V Rechargeable Black Battery Charger and Case Sold Separately

[Product Infomation] Brand : Makita Materials : plastic

[Product Description]

Japan's first cordless impact driver in the world, featuring a "full-circumference" ring-shaped LED light for optimal balance, a slim, all-around head, and comfortable operation. *Among domestic cordless impact drivers. As of December 2022, according to Makita research. Significantly improved visibility during work. Approximately 2.5 times brighter (compared to Makita's previous 18V model). Three brightness levels (strong/medium/weak) are available. *Among domestic cordless impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. Can be used as a simple light in "Light Mode." Burn time is approximately 1 hour.

New trigger switch. Intuitive trigger speed control from low to high. Grip closer to the shaft. The gripping hand is closer to the head, making it easier to press the shaft. Reduced cam-out. The battery is offset rearward. The center of gravity is optimized for balanced tightening in all directions. It also reduces interference with obstacles. The rear-located control panel makes it easy to see and use. You can adjust the mode and check the remaining battery charge without removing your grip.

- Industry-lowest bit runout, featuring double ball bearings. Newly designed bit sleeve. Ribbed edges prevent damage to materials even when the sleeve hits them. *For domestic cordless impact drivers. Makita research as of December 2022. Approximately 10.5° tilt angle. Excellent corner-hitting performance reduces cam-out, making working near walls a breeze. Select the optimal mode for the task. Mode memory function. By pressing two buttons simultaneously, you can register one frequently used mode. Use the remote button to switch between the "previously used mode" and the "registered mode."

- 18V DC, sliding Li-ion battery. Battery and charger sold separately. Tightening capacity: Machine screws M4-M8, standard bolts M5-M16, high-strength bolts M5-M14, coarse thread 22-125mm. Maximum tightening torque: 180 N・m. Rotation speed [rpm]: Fastest 0-3,600 / Strong 0-3,200 / Medium 0-2,100 / Weak 0-1,100. Easy mode rotation speed [rpm]: Wood 0-1,800 / Bolt 0-3,600 / Thin tex board 0-2,900 / Thick tex board 0-3,600. Number of impacts [min]: Fastest 0-3,800 / Strong 0-3,600 / Medium 0-2,600 / Weak 0-1,100. Easy Mode Impact Rate [b/min]: Wood: 0-3,800 / Volt: 0-3,800 / Thin Wood: Stops immediately after impact starts / Thick Wood: 0-2,600. Workload per charge (approximately 960 wood screws, lauan φ4.3 x 65mm).

Dimensions: Length 111mm x Width 81mm x Height 234mm. Weight: 1.5kg (including battery).

Japan's first "all-around" ring-shaped LED light, offering optimal balance, a slim all-around head, and comfortable operation. *As of December 2022, based on Makita research, among domestic cordless impact drivers. Dramatically improves visibility during work. Approximately 2.5 times brighter (compared to Makita's previous 18V model). Three brightness levels (strong/medium/weak) are available. *As of December 2022, based on Makita research, among domestic cordless impact drivers. Can also be used as a work light. Can also be used as a simple light in "Light Mode." Burn time is approximately 1 hour. New trigger switch. Intuitive trigger speed adjustment from low to high. Grip closer to the shaft. Holding the hand closer to the head, it's easier to press the shaft. Reduces cam-out. Battery offset rearward. Optimized center of gravity allows for balanced tightening in all directions and reduces interference with obstacles. The rearward-located control panel makes it easy to see and use. Mode selection and remaining battery charge can be checked without removing the grip. Industry-lowest bit runout, featuring double ball bearings. Newly designed bit sleeve. Ribbed edges prevent damage to materials even when the sleeve hits them. *Based on Makita research in Japan as of December 2022. Tilt angle approximately 10.5°. Excellent corner-hitting performance reduces cam-out. Comfortable for working near walls. Select the optimal mode for your task. Mode memory function. By pressing two buttons simultaneously, you can register one of your frequently used modes. Use the button on the device to switch between the previously used mode and the registered mode. 18V DC, slide-type Li-ion battery specification. Battery and charger sold separately. Tightening Capacity: Machine screws M4-M8 / Standard bolts M5-M16 / High-strength bolts M5-M14 / Coarse thread 22-125mm Maximum Tightening Torque: 180N・m Revolutions per minute (rpm): Fastest: 0-3,600 / Strong: 0-3,200 / Medium: 0-2,100 / Weak: 0-1,100 Easy Mode Revolutions per minute (rpm): Wood: 0-1,800 / Volts: 0-3,600 / Thin wood: 0-2,900 / Thick wood: 0-3,600 Blows per minute (rpm): Fastest: 0-3,800 / Strong: 0-3,600 / Medium: 0-2,600 / Weak: 0-1,100 Easy Mode Reactions per minute (rpm): Wood: 0-3,800 / Volts 0-3,800 / Thin wood panel: Stops immediately after impact starts / Thick wood panel: 0-2,600 Workload per charge (wood screws, lauan φ4.3 x 65mm): Approx. 960 screws Dimensions: Length 111mm x Width 81mm x Height 234mm Weight: 1.5kg (including battery)

[Important Notes - For International Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legal and Safety Standards This product complies with Japanese safety standards. Before using this product in your country, please verify compliance with local legal and safety standards. Certain product categories (electronic devices, cosmetics, food, etc.) may require importing country certification.

2. Regarding Electrical Products [Voltage Compatibility] When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.

[Plug Type] Our products use Japanese plug types (Type A or Type B). Please use a conversion adapter if necessary.

[Important Notes Regarding Transformers and Adapters] A transformer adjusts the voltage to match the device's requirements. A conversion adapter only modifies the plug shape; it does not adjust the voltage. Using a conversion adapter without a transformer may damage the product.

[Liability] We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.

3. Language and Manual Product instructions and labels may only be in Japanese. You can download the English manual from our website.

4. Product Returns and Exchanges Please note that if you wish to return or exchange a product, you must submit a video of the product being unpacked.