10pcs Ceramic Transfer Paper Set for Bisque Painting Tracing Copying Sketching Transparent Sheets

10pcs Pottery Tools Transfer Paper Green Painting Set Copy Drawing Painting Transparent PaperProduct name: Green drawing setweight : About 89.7gmaterial : Sydney PaperSpecifications: 1 pencil +1 instruction booklet +10 transfer papersuse : Can be used for pottery green painting transfer patternsnote : After the transfer paper is used up, it cannot be used againstored : In a dry and cool place, ensure that the transfer paper is not damprecommendations : Try to use up transfer paper within 3 monthsusing step① Select the pattern that needs to be rubbed, and perform horizontal mirror inversion processing to print the mirrored pattern, or directly display it on electronic devices such as iPad;② Cut the transfer paper to a suitable size according to the size of the paper screen and cover it on the pattern that needs to be rubbed;③ Transfer paper is divided into smooth surface and rough surface. When using, the rough surface needs to be placed towards the pattern;④ Use a red pencil to trace lines along the outline of the pattern. Since the copying paper is thin, the force should be light when tracing to avoid scratching the paper;③ Dip a sponge in clear water and gently wipe the surface of the green body to replenish water and remove dust;④ Lay the transfer paper with the pattern evenly on the green surface to ensure that there are no wrinkles, otherwise the transfer effect will be affected;③ Use a brush to dip in a small amount of water and gently brush the paper; keep the tip of the pen slightly moist. Too much water will cause the pattern to smudge;8 After the transfer paper is completely dried, gently remove it;Finally, use a brush, underglaze color marker or ceramic color lead to mark and fill in color along the red outline line;After the painted work is dried, it can be sprayed and fired.Notes TIPS:① Be sure to mirror the pattern before rubbings, otherwise the picture transferred to the green blank will be reversed;② Place the transfer paper rough side down, and we need to trace on the smooth side;③ When brushing water with a brush, make sure that the side on which the picture is drawn faces the green surface;④ The brush should not be dipped in too much water. Too much water will cause the red handwriting to faint and affect the clarity of the lines.③ Keep it flat when laying the transfer paper. If there are wrinkles, the part will not be completely transferred to the blank;④ The red mark rubbings on the green body will completely disappear during the high-temperature firing process, so there is no need to worry about leaving any red traces.