Laptop TF to IDE Adapter Card for DOS NT4 WINDOWS98SE ME 2000 XP VISTA 7 8 10 MAC Linux… Ещё

Feature: 1. Supporting DMA and ULTRA DMA mode, it is suitable for DOS NT4 WINDOWS98SE ME 2000 XP VISTA 7 8 10 MAC Linux system. 2. TF card can be included with the OS and application software, thus the device can be started directly. 3. There are two main control chips on the board, meanwhile there is a TF card socket on the back. 4. The TF card has characteristics of small size, large capacity, stable performance, permanent and effective data storage, and no tracking error. 5. With characteristics of small footprint, compact design, simple operation, anti vibration, high temperature resistance and no noise, this riser card allows you to use a TF card with this superiority to connect to a standard IDE interface as a standard IDE storage device. Specification: Item Type: Adapter card Material: ABS Color: Black Installation Instructions: First install the TF card into the slot, then connect the hard drive data cable to the interface of the notebook hard disk. The power on detection can be operated normally. It is so simple, no need to make any driver. Maximum Support: 128G Secure Digital Memory Card Compliance with Standards: TF standard Ver 2.0, IDE ATA 33 standard Standard IDE Interface: True IDE mode, and supports DMA 33 transfer mode IDE Interface: 44 pin 2.0mm male connector Size: L: Approx. 52mm 2.0 in W: Approx. 41mm 1.6 in H: Approx. 5mm 0.2 in Suitable: For DOS NT4 WINDOWS98SE ME 2000 XP VISTA 7 8 10 MAC Linux system. Package List: 1 x Adapter Card Note: For soft routing, the TF card size is enough within 1G. If you install for WIN98 WIN ME WINXP, and other system, the TF card capacity is preferably 2GB or more. UHS I high rate card is not supported, etc.