Plastic Model Improvement Committee (Puramokoujouiinkai) Sarena Inner Cap 02 (for T Company 10ml Cylindrical Bottles) Pack of 6, Hobby Tool, PMKJ015TM

Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.

1. KEY FEATURES: - Size: Diameter approx. 29mm x height approx. 11mm - T company 10ml cylindrical bottle - 6 pieces - A special inner cap that makes it easy to remove paint from the bottle without dripping. - After use, you can close the lid and store it while attached to the bottle.

2. PRODUCT DESCRIPTION: Product Introduction Plastic Model Improvement Committee ``Tarena Inner Cap 02 (for T company 10ml cylindrical bottle) 6 pieces'' Hobby tool.When removing paint from a bottle, paint may adhere to the edges and threads of the bottle, causing trouble in wiping and waste of paint, and adhering paint can also cause the lid to stick.[Tarena Inner Cap] is a special inner cap that allows you to pour paint without dripping by attaching it to a paint bottle, making it easier to take out paint from the bottle.After use, you can close the lid and store it while attached to the bottle.- Just open the lid and put it on!Installation is completed by simply attaching the [Tarena Inner Cap] that matches the diameter of the paint bottle with one touch.The rim is designed to be extremely thin, making it easy to drip even highly viscous paint, allowing you to pour cleanly without staining the rim or screw groove of the bottle.Paint can be removed directly from the bottle without twisting the stick or using a stirrer or stirrer, which reduces paint waste.The material is highly solvent resistant and can be used with water-based, lacquer and enamel paints.*Please mix the paint well before use.*When pouring paint, pour slowly and pour it back slowly.*Before installing the Tarena Inner Cap, please wipe off any paint adhering to the spout of the paint bottle (the contact surface with the Tarena Inner Cap) with a cotton swab, etc.•You can close the lid while wearing it!After taking out the paint, you can close the lid without removing the [Tarena Inner Cap] from the bottle.The special shape allows paint to be stored in a highly airtight manner without leaking.When you want to use the paint again, just open the lid and pour out the paint, so there is no need to reinstall or clean it.It also prevents paint from adhering to the edges and threads of the bottle, reducing the chance of the lid sticking to the bottle due to dry paint.*If there is any paint left on the edge, wipe it off before closing the lid.*When the Tare Inner Cap [02] is installed, the total height when the lid is closed will be slightly higher than when it is not installed.- Great for preserving airbrush paint!By diluting the paint with a spare bottle fitted with a dripping inner cap, you can pour paint directly into the airbrush cup without dripping.Excess diluted paint can be stored and reused with the lid closed, reducing paint waste and increasing painting efficiency.Size: Diameter approx. 29mm x Height approx. 11mm Set contents: 6 pieces (for T company's 10ml cylindrical bottle) *This product does not completely prevent dripping.Dripping may occur depending on the condition of the paint and how it is poured.*Please mix the paint well before use.*Please do not use it for anything other than the compatible bottle.*This product is exclusively for model paint.Do not use as a solvent spout.(This may cause liquid leakage or dripping.) *Due to the specifications of this product, the lid will not close easily.The lid may come off if you close it too hard, so be careful not to close it too much.*If you close the lid while the edge of this product is dirty, it may become difficult to open, so please wipe off any remaining paint on the edge with a cotton swab.*Due to the specifications of this product, the paint that adheres to this product may become solid when it dries, but this does not cause any problems in use.*Please be sure to store the paint bottle upright to prevent leakage.*Depending on the type of paint, color may transfer to this product.*When replacing paint bottles with different colors, the adhering paints may mix and cause discoloration, so please use a new bottle for each paint.*When reusing, please attach it to a paint bottle of the same color.*To maintain airtightness, wipe off any remaining paint from the spout after use and close the lid.*Due to individual differences and combinations of this product and bottle, it may not fit properly.*When handling paint, please follow the instructions provided by each paint manufacturer.*Product specifications and appearance are subject to change without notice.*This product is a hobby tool.* Items other than this product (adhesives, paint, batteries, etc.) are not included.Safety Warning Not applicable

3. PRODUCT DIMENSIONS & WEIGHT: - Weight: 0.01 kg - Dimensions: 17.7 x 9.0 x 1.2 cm

4. SPECIFICATIONS: