RADILA(Radio Technologies Laboratory) RADILA 8DFB matching type MP connector on both ends SWR measurement data Adopted by Fujikura Low loss 50 ohm ...

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ A coaxial cable assembly suitable for fixed stations. The cable is made by Fujikura. Adopts the popular 8D-FB-LITE coaxial cable made by Fujikura Dia Cable. 8D has less attenuation than 5D, and FB has less attenuation than 2V, so if you are concerned about transmit power attenuation, you can expect a big improvement. The connector uses a 50Ω matching type connector. With the solder type, the connection to the cable's braided wire is only soldered in two places, but the 50Ω matching connector has a structure that connects the entire circumference of the cable's braided wire without leaking. Due to these structural differences, the SWR and transmission loss can be kept low compared to the solder type. The connector screws are metric screws. Actual measurement data of SWR and passing loss is attached (1MHz to 600MHz). Each product is affixed with a serial number, and after production, we measure and manage the SWR (S11) and passing loss (S21) using a VNA (vector network analyzer). The actual measurement results of SWR and passing loss are attached to this product.