【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
Connect M.2 SSD externally at high speed: Bus-powered and compatible with both USB Type-C and A.
Easy to assemble into the case: Easy to assemble using the special removable pin.
A cooling fan, aluminum body, heat sink, and thermal conductive sheet provide effective heat dissipation from the M.2 SSD that generates heat.
Equipped with RGB-LED, cool lighting even in the dark. *Can be switched with ON/OFF switch.
●22mm wide, M-Key / B&M-Key shaped M.2 NVMe standard SSD compatible aluminum case with FAN.
●Equipped with RGB LED, cool lighting even in the dark. *Can be switched with ON/OFF switch. (The RGB pattern is only illumination (1 pattern). There is no RGB synchronization function.)
●Achieves effective heat dissipation from M.2 SSD that generates heat using cooling fan, heat sink, and thermal conductive sheet.
●Compatible with both USB Type-A and Type-C connections. Type-A → Type-C conversion connector included.
●Supports USB3.2 Gen2 connection. High-speed transfer of up to 10Gbps (theoretical value) is possible *Actual value in Century environment. (Measured with Western Digital black SN750 2TB)
●※USB3.2 Gen2 has the same specifications as USB3.1 Gen2.
Model number: CRC-LFM2NU32
Warranty period: 1 year
Body color: black
Device side interface: M.2 NVMe SSD
Host side interface: USB 3.2 Gen2 (theoretical value maximum 10Gbps)
Cooling fan size: 2cm square 10,000rpm ±20%
Cooling fan noise: 23.6dB (measured value for cooling fan alone)
Case body USB connector shape: Type-C
USB cable length: Approximately 35cm (including connector part)
Dimensions: Width 125.5mm Height 15.5mm Depth 36.5mm
Weight: Approx. 73g (excluding heat sink)
■Supported OS:
Windows 10/Windows 8.1
*Intel USB host recommended.
*WindowsRT, Embedded, Enterprise, and mobile are not supported.
MacOS 11.1/10.15.7/10.14.6/10.13.6
*Operation with an expansion interface is not supported.
*Operations when starting Windows using Boot Camp are not supported.
■Compatible M.2 SSD:
M-Key/B & M-Key shape M.2 NVMe standard SSD (Type-2280 / 2260 / 2242)
*M.2 SSDs of SATA standard, AHCI, B-Key shape, etc. cannot be connected.
*Double-sided mounting type M.2 SSD can also be installed.
*M.2 SSD with a heat sink attached cannot be installed.
■Product contents: ・CRC-LFM2NU32 main body
・Exclusive pouch
・Dedicated USB cable
・Dedicated USB conversion connector (Type-A ⇒ Type-C)
・Case removal pin
·heat sink
・Thermal conductive sheet
・Rubber for fixing heat sink x2
・Rubber pins for fixing SSD x 2 (1 spare)
・Instruction manual/warranty
