Buffalo Series White WAPM-2133R/Z WAPM-2133R/Z

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ 3-year + 2-year warranty Maintenance support Equipped with emergency mode Fair communication control DFS failure avoidance Automatic interference wave avoidance 3-year + 2-year warranty Maintenance support Equipped with emergency mode Fair communication control DFS failure avoidance Automatic interference wave avoidance Please note: If you are using a Category 6A tool-free connector, the case may not close. Please check the connector size you are using and purchase the following products if necessary. Security case for Category 6A tool-free connector: WLE-OP-SCB "DFS failure avoidance function" now available on YouTube Verification with WAPM-2133TR What is DFS? DFS is an abbreviation for "Dynamic Frequency Selection." If there is interference from weather or aviation radar in the 5GHz frequency band W53 or W56, the access point side will evacuate to a channel free of interference. It is required by law and is always installed on access points. If there is interference, it is necessary to turn off the wireless LAN and monitor for 60 seconds to see if the channel you are planning to move to interferes with the radar waves. “Video distribution in-house product comparison verification with 40MHz bandwidth” on YouTube Delivering 60 seconds of video (1.5Mbps) now available Comparison verification between WAPM-1750D and WAPM-APG600H The fair communication control function adjusts the communication status of each tablet and suppresses variations in video playback. Verification with WAPM-2133TR It can automatically detect noise emitted from non-Wi-Fi devices such as cordless phones, which could not be avoided with conventional products, and change to a channel that does not interfere. Furthermore, in addition to changing the channel at startup or at specified time intervals, it is also possible to change the channel dynamically by detecting an increase in channel usage or radio wave interference. In addition, channels can be dynamically changed only at the necessary timing according to the detection level, which prevents channel changes at unnecessary times. "Effects of interference between access points" now available on YouTube Verification with WAPM-1266R It is possible to switch multiple access points to "emergency mode" at once. By configuring the settings in advance, even those without specialized knowledge can activate the settings on the target device by simply pressing a button in an emergency. Possible only from the network management software WLS-ADT ``Switch access points all at once to emergency mode'' is now available on YouTube ``Communication performance with multiple devices useful for evacuation centers Simultaneous communication with 80 tablets'' is now available Verification with WAPM-2133TR In consideration of the environment, this product does not come with an AC adapter. When using an AC adapter, please use the optional AC adapter "WLE-OP-AC12C" (sold separately). Power consumption when using wireless LAN is reduced by turning off the LED. This product supports PoE (IEEE 802.3at), which allows power to be supplied using a LAN cable. Wall hanging hardware is included as standard. It has a high degree of installation freedom and can be installed in locations where the radio waves are more stable. Please note: If you are using a Category 6A tool-less connector, the case may not close. Please check the connector size you are using and purchase the following products if necessary. Security case for Category 6A tool-free connector: WLE-OP-SCB The design is such that the radio waves can easily travel to the front side (the side with the BUFFALO logo), making it easier for the radio waves to reach the entire classroom. This product is long As a result of our lifespan design efforts, we offer a 3-year warranty as standard, and if you register for a 5-year warranty online within 30 days of purchase, we will extend the warranty period by 2 years, giving you a maximum of 5 years. Registration by the customer is required in advance to receive the 5-year warranty. Please be sure to register within 30 days of purchasing this product. The 5-year warranty registration will be completed when we send you the "Registration Completion Notification Email".