Dual Power Automatic Transfer Switch 4P Fast Switching PC AC 110V 63A for Home Factory… Ещё

Feature: 1. Good Materials: Premium flame retardant PC plastic material has good insulation, high temperature resistance, anti aging, safe and reliable, while the silver contacts can greatly improve the conductivity and service life. 2. Operation Mode: Can be operate automatically or manually, millisecond switching without power failure, compact structure, reliable transmission, convenient installation and maintenance, and long service life. 3. Easy Installation: Dual power automatic switch is a miniature household power switch that is mainly used to test whether the main power supply or standby power supply is normal. This product is specially designed for track installation and is dedicated to PZ30 power distribution box. 4. Quick Switching: When the power supply is abnormal, the standby power supply works immediately, and millisecond level switching ensures continuous power supply as well as the continuity, reliability, and safety of power supply. 5. Wide Application: Switch to standby power supply when power failure occurs, and switch to main power supply when power restoration occurs. It is suitable for emergency power supply systems with a 50 or 60 Hz AC rating of 110V 63A. Widely used in various situations where continuous power outages are not allowed. Specification: Item Type: Dual Power Automatic Transfer Switch Model: NLQ3-125/4P Material: PC, silver. Switch Type: Secondary Distribution Rated Current: 63A Rated Voltage: 110V AC Insulation Voltage: 690V AC Rated Frequency: 50/60Hz Electrical Level: PC Level Isolation Type Rated Impulse Withstand Voltage: 8KV Touch Time: <50ms Operation Conversion Time: <50ms Return Time: <50ms Closing Time: <50ms Package List: 1 x Dual Power Automatic Transfer Switch Note: 1. The maximum ambient temperature shall not exceed 40 ℃, the minimum temperature shall not be lower than ‑ 5 ℃, and the average temperature within 24 hours shall not be higher than 35 ℃. 2. The altitude of the installation site should not be higher than 2000m. 3. When the maximum temperature reaches 40 ℃, the relative humidity of the installation site should not exceed 50%. When the temperature is the lowest temperature ‑5℃, the relative humidity is higher, for example, when the temperature is 25℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the surface of the product.