Car Metal Anti-Rust Rust Remover Spray with Brush Iron Paint Cleaning Sprayer Set Surface Maintenance Repair Tool
Feature:
Modification of existing rust: the chassis rust converter is modified and replaced with black protective polymer barrier.
Protect iron and metal surfaces: it can repair and protect iron and metal surfaces on cars, garbage cans, equipment, railings, etc.
Prevent future corrosion: this anti rust treatment prevents future corrosion by preventing moisture in rain and snow. Dry in 20 minutes.
Non toxic and smokeless formula: it is a non flammable, low VOC water-based treatment agent. It is non-toxic and will not emit harmful smoke.
Specification:
Material: water based primer
Net content: 30ml
Size: 8.5 * 3cm/3.3x1.2in
Brush: 13.5 * 1.5cm/5.3x0.59in
Tips:
Surface treatment: use wire brush or sandpaper to remove large rust and scale particles. Thoroughly clean the surface to remove dirt, dust and grease.
Application: shake well or stir well before use. Use brush, drum or pump sprayer to spray two coatings, and there will be at least 20 minutes of drying time between the two coating. 48 hours of curing time is required before applying high-quality paint.
Cleaning: the application equipment shall be cleaned immediately with soap and water.
General: do not use this product if the surface temperature is lower than 50 ° F. Store in a cool, dry place to prevent freezing or temperatures above 100 ° F. In order to protect the iron sheet surface for a long time, the cured antirust coating shall be sealed with two layers of high-quality oily paint. No other primer is required.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Included:
1 x Rust Remover
1 x Brush
1 x Sandpaper
1 x Glove
