[Product Overview] This tripod mount is compatible with the Canon RF 75-300mm f/4-5.6 Telephoto Zoom Lens (RF mount), which is not available with the original equipment. It is machined from aluminum with a black anodized finish.
[Product Features] While this lens does not have a tripod mount, this product allows you to mount it on a tripod mount and shoot. The shooting position can be rotated horizontally and vertically.
[Usage Precautions] This ring-type mount is attached to the space between the lens's zoom ring and switches. The tripod mount is secured to the lens by encasing it in cushioning material. Therefore, if you carry the tripod mount without holding the lens, it may come loose. When carrying the camera, hold the lens, not the tripod mount.
[Installation Instructions] For installation, refer to the photo in the product description and follow the steps below: 1. 1. Loosen the tripod mount screw counterclockwise until it is almost completely unscrewed. 2. Spread the ring with your hands. 3. While spreading it, attach it to the lens. (Be careful not to let the sponge inside the tripod mount interfere with the switch on the side of the lens.) 4. Adjust the mounting position and tighten the screw. (After installation, the switch on the side of the lens may move, so check it as necessary and return it to its original position. Be careful not to overtighten the fixing screw. Doing so may damage the lens.)
[Shooting Position, Fixation Method] The camera can be rotated horizontally or vertically. The lens is secured to the tripod mount with a screw, which can be removed or rotated by loosening the screw. However, since the tripod mount is secured by encasing the lens with cushioning material, frequent rotation or removal is not intended. Please use with caution. The tripod mounting screw hole is 1/4" (1/4"). The tripod mount features two screw holes, one for 3/8" and one for 3/8" screw sizes, allowing it to be attached to a variety of tripods. The base is designed with an Arca-Swiss compatible quick shoe.
[About the Manufacturer] F-Foto was founded in 2012 (now in its 14th year). We are a camera accessory manufacturer based in Gunma, Japan, selling lens hoods, shoe covers, tripod mounts, and more. Our lens hoods and other products have over 700 user reviews. We also provide sincere customer support, so you can purchase with confidence.
[Product Overview] This tripod mount is compatible with the Canon RF 75-300mm F4-5.6 Telephoto Zoom Lens (RF mount), which is not available with the original manufacturer's products. It is machined from aluminum and has a black anodized finish.
[Product Features] Although this lens does not have an original tripod mount, this product allows you to attach it to a tripod mount for shooting. It can be installed in either horizontal or vertical shooting positions.
[Notes on use] The ring-type design is attached to the space between the lens's zoom ring and switches. The tripod mount is secured to the lens by wrapping around the lens with cushioning material between them. Therefore, if you carry the lens without holding the tripod mount, it may come loose. When carrying the lens, hold the lens rather than the tripod mount.
[Installation method] For installation, refer to the photo in the product description and follow the steps below. 1. Loosen the screw on the tripod mount body until it is almost unscrewed (counterclockwise). 2. Spread the ring with your hands. 3. While spreading it, set it on the lens. (Take care not to interfere with the sponge inside the tripod mount and the switch on the side of the lens.) Please be careful.) 4. Adjust the mounting position and tighten the screws. (After installation, the switch on the side of the lens may move, so check and return it to its original position as necessary. Be careful not to overtighten the fixing screws. (Overtightening may damage the lens body.)
[Shooting Position, etc., Mounting Method] The camera can be oriented horizontally, vertically, and rotated. It is attached to the lens with a screw, and can be removed or rotated by loosening the screw. However, since the tripod mount is secured by encasing the lens with cushioning material, it is not designed for frequent rotation or removal, so please use with caution. The tripod mounting screw holes are compatible with both 1/4" and 3/8" screw sizes, allowing it to be attached to a variety of tripods. The base is designed with an Arca-Swiss compatible quick-release shoe.
