WAKO'S RSL-2 Radiator Stop Leak 2, for Construction Machinery and Heavy-Duty Vehicles, 280ml, R212 Coolant Leak Stopper

Product Introduction

[WAKO'S Radiator Stop Leak 2 has been revamped (previously: R112)] WAKO'S Radiator Stop Leak 2 is a leak stopper that quickly stops leaks from radiators and heater cores in trucks, heavy equipment, and construction machinery. This latest update features a redesigned particle and fiber design, making it compatible with vehicles with narrower flow passages than ever before. The new light blue color and improved anti-electrolytic corrosion protection ensure safe use with a wide range of coolants and applications.

◆Applications Leak stopper for large vehicles, construction machinery, industrial machinery, etc. *For passenger cars and motorcycles, please use RSL (product number: R211).

◆Features ・Highly dispersible in water and coolant, providing immediate results! ・Light blue color complements any coolant color! ・Discharges along with the coolant when drained, refreshing after repairing a leak! ・Can also be used on inverter coolant! ・Reduced impact on the environment and human health!

◆Instructions for Use 1. Start the engine and identify the location and cause of the leak. 2. Allow the engine to cool until the radiator cap can be opened. 3. Shake the product well and pour it into the radiator cap. *For vehicles without a radiator cap, pour it into the coolant reservoir tank. 4. If the coolant level is low, refill with the appropriate concentration of coolant. 5. After pouring, start the engine and warm it up until the coolant circulates, then check for any abnormalities. *If an abnormality occurs in the cooling system after using this product, promptly drain the coolant and rinse the system with tap water to remove the leak-stopping agent.

Safety Warnings

- Do not use as a preventative agent in vehicles where no leaks are occurring. - Do not use above the recommended concentration. - Diligently check the condition and level of coolant even after use. - Inspect the cooling system and do not use if there is limescale on the reservoir tank, the coolant is contaminated, or the leak is due to corrosion. - Do not use in vehicles equipped with a filter in the cooling system. - For large vehicles, use 0.5-1.5% of the coolant volume (1 bottle per 20-50 L). For construction and industrial machinery (vehicles with large-capacity radiators of 100 L or more), use 0.5-0.7% of the coolant volume (1 bottle per 40-50 L). - This product is for emergency use only; repairs should be made as soon as possible. - Shake well before use, as the active ingredient may settle if left unattended for an extended period of time. ・This product's viscosity may change depending on storage conditions, but this does not affect its use. [WAKO'S Radiator Stop Leak 2 has been revamped (previously: R112)] It disperses well in water and coolant, providing immediate results! ●Its pale blue color complements any color coolant! It drains along with the coolant when it's drained, so it refreshes after repairing a leak! ●Can also be used with inverter coolant! ●Reduced impact on the environment and human health! Uses: Water leak prevention agent for large vehicles, construction machinery, industrial machinery, etc. *For passenger cars and motorcycles, please use RSL (product number: R211).