TaoTech Snow Goggles for Snowboarding and Mirror OTG Gray Skiing, Coating, Anti-Fog, Kids' (White Frame, Lens)

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

[Full UV Protection] REVO Mirror Coating cuts out the glare from the snow, protecting your eyes while maintaining sufficient brightness. [Plano-curved Lenses] Minimizing distortion ensures a natural view close to that of the naked eye, ensuring a wide, bright field of view. [Magnetic Detachable] Nine strong magnets securely hold the lenses, preventing them from falling out and allowing for quick removal when changing lenses. [OTG] Compatible with eyeglass frames up to 12cm wide. [Asian Fit] Three layers of sponge foam gently seal the gap between the frame and your face for a comfortable fit. The nose piece is thicker than the previous model, providing a better fit for Asian faces! [Anti-Fog] [Double Lens] With single-layer lenses, the warm air near your eyes condenses on the lens surface, which is cooled by the outside air, causing fogging. With double-layer lenses, the air between the lenses acts as an insulating layer, eliminating the temperature difference between inside and outside, making them less likely to fog. [Ventilation] Warm air from the insulating layer is slowly released through the vents, creating an air flow that reduces fogging. [Anti-Fog Coating] A special coating on the inside of the lens removes small droplets of water that form due to temperature differences. [Caution 1] Do not wear goggles on your forehead or other areas where moisture is easily absorbed. If you hold the goggles up on your forehead, moisture from sweat will be drawn into the insulating layer through the ventilation holes, causing fogging. [Note 2] Before each use, be sure to allow the goggles to dry completely, even between the two lens layers. For example, when packed on flat ground with a humidity of approximately 80%, the humidity of the insulation layer will be 80%. If you take these goggles out of the pack at a ski resort, isolated from the outside air and with a humidity of around 40%, the air in the insulation layer will be exposed to cold, dry air, causing fogging. To prevent fogging when wearing the goggles, remove them and allow the moisture in the insulation layer to dry before putting them on. *Please note that high-temperature air may cause lens deformation when drying.