Feature:
1. The leakage proof strip has smoothly and beautiful surface, with center crease line and 90 degrees bend for tightly sealing the gaps.
2. Widely used, such as sinks, kitchen gas stove, bathroom sink, bottom corners of bathtub, bottom edges of wall and wall gaps.
3. With self adhesive back adhesive, strong adhesion, not easy to fall, provides a durable sealing with excellent durability.
4. Easy to clean, smoothly surface, waterproof, anti dirt, anti mildew, anti moisture, keep kitchen and bathroom neat.
5. The installation is simple, before installation, please clean the part and dry it, and cut out the length as needed.
Specification:
Condition: 100percent Brand New
Item Type: Gaps Strip
Material: PE + Butyl Rubber
Color: White
Using Temperature: 40 celsius 100 celsius
Width: Approx. 2.2cm 0.9in
Length: Approx. 3.35m 11ft
Weight: Approx. 149g 5.3oz.
Package List:
1 x Gaps Strip1 x User Manual
Note:
1. Clean the parts to be sealed firstly and keep them dry;2. Before use, firstly measure the length dimension of the required sealing part accurately;3. Take out the product, measure the same length of the waterproof strip and the sealed part again and cut it;4. Firstly peel off the 5cm length of the adhesive tape on the back of the product and fold it to 90 degrees , and then fix the waterproof strip on the surface to be pasted; continue to peel the adhesive tape until all installations are completed;5. When the product is pasted at a 90 degrees turn, cut each side of the joint into a 45 degrees mating interface.6. The temperature range of the installation room is preferably around 25 celsius , if the temperature is too low, the adhesive can be pasted after heating the adhesive with a hair dryer;7. After the product is pasted, it will be pressed hard to make it stick more firmly;8. After the product is pasted, do not mix with water within 24 hours and keep it dry.
