Seisei Solid Slanting Hammer Holder, Right-Handed, Natural Plus Color

Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.

1. KEY FEATURES: - This product was devised based on the opinions of carpenters and temple carpenters who are working hard in the field.Previous hammer holders were parallel to the carpenter's feet when stored, and the handle could hit the carpenter's knees.Also, when I crouched down, the tip of the hammer handle would sometimes hit the floor.In order to improve on the above issues, we designed the hammer to be diagonal, with right-handed and left-handed versions, and a chain-type hinge to allow it to move freely.Seisei is a registered trademark.(Registration No. 5809715) - Also, since the hammer has a long handle, we had to be careful not to damage the building.Similarly, since Sashigane has a long overall length, we had to be careful in the same way.By carrying a long type of hammer and chisel in the same position as your waist tools, you can be careful while keeping the same awareness.A strong neodymium magnet is placed in the cutting holder to prevent it from falling. - In addition, most conventional hammer inserts have a narrow storage space, making it impossible to insert hanging arrows and rubber hammers used for foundation pulling and construction.We made the caliber of the storage section as large as possible so that it can accommodate hanging arrows, rubber hammers, and items with custom handles.In addition, the part where the hammer is housed is reinforced with two layers of thick tanned leather.Also, based on the feedback that it was difficult to get the drift pin out of the nail bag, we placed a loincloth material under the hammer holder and installed a hidden bullet holder.At the time of construction, you can first insert the first drift pin to secure the frame.You can take out the drift pin and hammer with one hand.In addition to drift pins, you can also insert nails, small nail pullers, pens, etc. - ●Main material: Tanned leather ●Nume leather color: Natural color ●Rivet color: Chrome black ●Made with thick genuine cow leather that is usually used for belts with an original thickness of around 3.5mm.●Belt loop opening: approx. 75mm ●Size (approx.): Length 190mm x Width 95mm x Depth 90mm ●Weight: Approx. 210g (Depending on your monitor, there may be slight differences in the color of the actual product and the image.)

3. PRODUCT DIMENSIONS & WEIGHT: - Weight: 0.21 kg - Dimensions: 19.0 x 9.5 x 9.0 cm