Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.
1. KEY FEATURES:
- (Features) ◎A hook that can be attached to wallpaper, etc. using the included special adhesive.◎For flat surfaces such as vinyl wallpaper, stainless steel, tiles, etc.◎Semi-transparent and inconspicuous.◎When removing it, it won't damage the wall and can be removed cleanly.
- ○ Wall surfaces that can be pasted Vinyl wallpaper, stainless steel, tiles, printed plywood, glass, iron, melamine decorative board *However, adhesive stains may remain after removal.× Wall surfaces that cannot be pasted: Non-vinyl wallpaper, patterned stainless steel tiles, water-repellent wallpaper, highly uneven surfaces, rough surfaces, curved surfaces, and surfaces that get hot such as ranges and stoves *Cannot be used outdoors.*Please avoid using near fire, high temperatures, and direct sunlight.
- Pitacco wallpaper hook M Product number KM-435 JAN 4956810864355 Load capacity: 1kg Contents: 2 hooks 1 special adhesive (2.5g) Material: Hook/Polyethylene Adhesive/Modified silicone
- <How to install> First, check that there are no floating, seams, edges, tears, or holes in the wallpaper in the area where it will be installed. Wipe off any dirt or moisture from the wallpaper, and then install as described below.
- 1.Put a hole in the mouth of the tube using the protrusion on the top of the adhesive cap.*Please note that due to the characteristics of the tube, the adhesive may come out when opened.2. Apply adhesive evenly along the groove on the back of the hook from the center outward.*One adhesive can be applied to two hooks.3.Press it on the surface you want to paste for about 30 seconds to make sure the entire hook sticks firmly.*Can be used after 24 hours have passed since pasting and the adhesive has completely hardened.If the adhesive spills out, you can remove it with your fingers or nails after the adhesive has hardened.*If you apply a shock to the hook or forcefully pull the protruding adhesive, the hook may come off the wall, so please remove it slowly and carefully.
2. PRODUCT DESCRIPTION:
(Features) ◎A hook that can be attached to wallpaper, etc. using the included special adhesive.◎For flat surfaces such as vinyl wallpaper, stainless steel, tiles, etc.◎Semi-transparent and inconspicuous.◎When removing it, it won't damage the wall and can be removed cleanly.
3. PRODUCT DIMENSIONS & WEIGHT:
- Weight: 0.01 kg
- Dimensions: 19.0 x 10.0 x 1.3 cm
4. SPECIFICATIONS:
![In a Konishi Bond Enamel Repair Blister Pack White 8g 10 Pieces [Sold Box]](https://img-edg.joomcdn.net/842b6b665e3a0615d1b182771306d0a156db0984_100_100.jpeg)