Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.
1. KEY FEATURES:
- ●Wide Compatibility Two-color strobe light, red and green, guides the direction of the drone.Drone general purpose led strobe light, DJI FLIP / DJI Neo / Mini 4K / Avata 2 / AIR 3S / Mini2 SE / Mini 3 / Mini 3 Pro / Mini 4 Pro / Mavic 3 / DJI FPV / DJI Avata / Air 2S / Mavic Mini / Mini 2 / Mini SE / Mavic Air 2 / Mavic 2 / Mavic Pro / Phantom 4 Pro / DJI Tello / Holy StoneCompatible with all commercially available drones.
- ●Easy to switch between modes Lamp color: Red (R)*2, Green (G)*2 3 modes: Fast flashing (1st time), slow flashing (2nd time), Constant lighting (3rd time), 4th time: OFF There are two markings, G means green and R means red.30-40LM high brightness, visible even at long distances.This is especially useful on cloudy days, at dusk, and at night.
- ●Tips The flashing light itself is very small, the capacity of the CR927 button battery is only 30mAh, and the duration varies depending on the mode of use.Approximately 120 minutes in flashing mode, approximately 30 minutes in constant lighting mode.If the LED light does not light up during use, the battery may be dead, so please replace the battery button directly.
- ●Usage time Flashing state: Approximately 120 minutes, Constant lighting: Approximately 30 minutes.8 spare batteries are included, and when it gets dark over time, just replace the included button batteries.Open the lid clockwise and twist counterclockwise to close the lid.Note: If the lid is not closed properly, it will easily fall off.Also, the button is out of position, so the switch doesn't work either.
- ●Easy to install The light is fixed to the drone with 3M Velcro (velcro), so it is easy to install.It can be pasted on the arm of the drone body or in any desired position.Note: 3M adhesive stickers tend to fall off if removed repeatedly, so please wipe the surface of the drone clean before pasting to maintain the adhesive strength.Also, avoid peeling it off repeatedly.
3. PRODUCT DIMENSIONS & WEIGHT:
- Weight: 0.05 kg
- Dimensions: 9.5 x 6.5 x 2.5 cm