DAIDOHANT Lightweight Ceiling White Head Diameter X Length L 20mm of 10176777 Screws, (Nominal D) 3.0 (Bell Head) [Iron/Zinc Plated] (Pack 300)

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- For fastening various boards in architectural interior construction work! Head diameter: 7mm. Material: SWRCH22A. Bit: Cross No. 2. Interior construction boards such as gypsum boards can be attached to steel substrates with a thickness of 1 mm or less without pre-drilling. Screws used to fasten wall and ceiling materials to steel base materials. The trumpet head has a large contact area, so it is firmly fixed in place and the head is less likely to get buried. Nickel plated. Head is white. Please be careful as excessive tightening may cause the screw to break. When carrying out installation, please wear safety equipment (helmet, safety glasses, dust mask, etc.). Always inspect power tools before use. Avoid using them for purposes other than their intended use or construction methods.