Tuningfan Shift Pattern for Manual Transmission Super Big and Emblem, Black, 7-Speed Vehicles, Giga, Great, Dolphin, Profia, Thumb, Quon, Black,

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Tuningfan Shift Pattern Emblem, Black, for 7MT Vehicles Hairline base + clear dome processing Size: 16mm long, 22mm wide, approx. 2mm thick Non-yellowing polyurethane resin used. Adhesive: Strong adhesive. Made in Japan We responded to the request for something that was as simple and unobtrusive as possible, while maintaining the quality of Tuningfan products. "No decorative frame" "Not too large" black shift pattern emblem Isuzu Giga, Fuso Super Great, Hino Dolphin, Profia, UD, Big Thumb, Quon Suitable for vehicles such as: Dome processing using highly transparent polyurethane resin Achieves both a beautiful three-dimensional luster and high durability through UV protection Upgrade your interior with a luxurious feel that is different from ordinary stickers. Compatible with all 7-speed manual vehicles with the same pattern as shown. It can be installed by simply sticking it on the side of the shift boot or on the shift panel. The size is 16mm long, 22mm wide, and approximately 2mm thick. The dimensions are almost the same as the original shift pattern labels provided by the automobile manufacturer so that they can be attached anywhere. A simple and timeless design without unnecessary logos or decorations Tuningfan original product By applying black to a metal hairline base, It has a texture similar to anodized aluminum, which changes color depending on the angle from which you view it. *Shift knobs that do not have a shift pattern written on them will not pass vehicle inspection. When riding on public roads, it is necessary to install a shift pattern plate like this. Recommended for those who do not have a pattern plate installed on an aftermarket shift knob. The adhesive used in this product is the strongest adhesive available. If there is dust or oil on the surface to which the sticker is to be applied, the adhesive strength will inevitably decrease significantly. If a polish or other agent has been applied, Please thoroughly remove any residue using parts cleaner or alcohol wipes before applying. After peeling it off the separator (backing), be careful not to touch the adhesive surface when pasting it. Apply pressure to the entire surface and press it in place. It may take up to 24 hours for the adhesive to stabilize. Please avoid moving or reattaching. If the temperature is below 10 degrees, it will be difficult to apply, so please use a hair dryer etc. Warm it up a little before applying it. General plastic (PE, PP material) for flat/gently curved surfaces This product is intended to be attached to interior panels. For application to rough surfaces such as grained surfaces, curved surfaces, and soft-touch paint Please use the included double-sided tape (JIS "Super Strong" manufactured by 3M). Dome: Polyurethane resin (non-yellowing) Pattern marking: Hairline laser printing Adhesive: Strong adhesive