Feature:
1. This product is a digital display programmable switch DC power supply, which can simultaneously display voltage, current, power.
2. Good stability and ripple coefficient, with short circuit protection, over voltage protection, over current protection, over temperature protection and other protection circuits.
3. With USB power supply interface, support PC software control function, widely used in product aging, research and development test, school and production line use
4. Product design is beautiful, easy to operate and use, with 4 digital tube display, stable performance, can long time full load work.
5. The output voltage and output current are pre regulated by the encoder knob and can be continuously adjustable between 0 and nominal values.
Specification:
Item Type: DC Power Supply
Material: Metal Plate+ABS
Model: WPS3010H
Output Current: 0A 10A
Output Power: 300W
Model
WPS3010H
Output Voltage
0 Nominal value voltage continuously adjustable
Output Current
0 Nominal current is continuously adjustable
Output Power
Voltage V Current A
Accessibility
Output output, OCP short circuit protection, USB fast charge interface
Input Voltage
AC115V+ 10percent , AC230V+ 10percent , the input AC voltage can be switched
Operating Temperature
0 celsius 40 celsius ; relative humidity: <80percent RH
Storage Temperature
10 celsius 70 celsius ; relative humidity: <70percent RH
Constant Pressure State
Voltage stability<0.5percent +3mV
Load Stability<0.5percent +3mV
Waves Noise<0.5percent V P P
Constant Current State
Current stability <0.5percent +3mA
Negative Stability<0.5percent +3mA
Waves Noise<0.5percent A P P
Protection Method
Over voltage protection, over current protection, over temperature protection, short circuit protection
Display
4 digit digital tube, three groups of voltage, current and power display
Display Accuracy
0.5percent +5
Display Resolution
Voltage: 0.01V, current: 0.001A (when greater than 100V: 0.1v, when greater than 10A: 0.01A)
.
Package List:
1 x DC Power Supply1 x Power Cord1 x Load Line1 x Manual
Note:
1. Please use a power cord that meets the power requirements of this product.2. Before use, the power supply must be grounded reliably, and the weak leakage current caused by the internal anti‑electromagnetic interference circuit of the power supply should be led to the ground, otherwise false leakage will occur, which may cause damage to the load equipment or cause the power supply to resist interference Decrease in ability.3. When using this power supply to charge a reusable battery, make sure that the positive and negative poles of the power supply are correctly connected to the positive and negative poles of the battery. If they are connected reversely, the internal rectifier components of the power supply may be burned out or the load equipment may be damaged.4. It is strictly forbidden to use this product in an environment with flammable, explosive materials, humidity, and corrosive gas.5. When this product is working, it will generate heat, especially under full power usage. Therefore, please use this product in an environment with good ventilation and heat dissipation, and ensure that there are no other obstacles in the vicinity of the product s cooling fan and vents.6. When using this power supply, please select an output wire with sufficient wire Diameter according to the output current of the product. The connection area between the wire and the power supply, the wire and the load equipment is large enough, the contact surface is clean and free of rust, and the connection must be firm to avoid heat damage to the terminal or load equipment, which may cause a fire in severe cases.
