KYO-EI MONOLITH T1/07 Inner Cap M14 Resin Red CMF4R

Product Introduction

This product is a resin cap shaped like a MONOLITH nut handle that fits inside the handle. Recommended for users concerned about corrosion of their vehicle's hub bolts. Available in two colors: red and black. Match the color of the nut for a unified look or a unique accent. (Note: When the inner cap is attached, the nut's effective thread length will be 23mm. Please note this applies to vehicles with long hub bolts.)

The actual product color may differ from the photo. Thank you for your understanding.

Note: When this cap is attached, the nut's effective thread length will be 23mm. Please note this applies to vehicles with long hub bolts.

Note: The adapter will fit slightly shallower. Please be careful when using the wrench at an angle.

Note: - This resin cap is rated at temperatures up to 100°C (212°F). It may melt or come off in harsh environments such as racing. Please remove it before use when racing. ・The cap is attached by inserting a tab into the screw groove to secure it. Due to its structure, it is secured with a plastic tab, so it is not completely fixed. It may come off due to tire rotation, vibration, or deformation due to heat. We ask for your understanding. Also, the cap may come off easily if it is not inserted all the way into the nut. Please make sure to insert the cap all the way when installing. *If you want to prevent it from coming off completely, secure it completely with strong adhesive. In that case, be sure not to get adhesive on the vehicle hub bolt. We also do not guarantee any malfunctions, damage, breakdowns, or accidents caused by this installation. We ask for your understanding. *Do not use an impact wrench. The vibrations of an impact wrench may cause the cap to come off. *Repeated installation and removal will wear down the securing tabs, making it more likely to come off. Please be careful.

*Make sure to insert the cap all the way into the nut. Insert the dedicated adapter for the nut and push it all the way in.

*If the cap is not inserted all the way into the nut, it will come off easily. If the cap appears to be inserted at an angle, it means it is not fully inserted. Use the dedicated adapter as shown in the diagram above and insert it all the way.

Caution (Disclaimer) > Please Read

*When installing this cap, the effective thread size of the nut will be 23mm. Please be careful when using it on vehicles with long hub bolts. *The adapter will not fit properly. Be careful not to use the wrench at an angle. Brand: MONOLITH T1/06 [M12] MONOLITH T1/07 [M14]