H3 H3C LED Headlights and Fog Warm Vehicle Inspection Compatible with Imported Set of 2 Fcl. (FCL) Lamps, White, Halogen, Compliant, 12V, Vehicles,

FCL's Legendary Series LED headlights offer the most powerful lumens available: H8, H9, H11, H16, HB3, HB4, H1, H3, H3C, and H7. These LED bulbs are over 10 times brighter than halogen bulbs and even brighter than HIDs, meeting vehicle inspection standards. Not only are they bright, but they maintain peak brightness over time, with virtually no lumen loss from the moment they are turned on until they stabilize. They can be installed on low beams, high beams, and fog lights, and are available in four colors: yellow, white, lime yellow, and warm white (halogen/warm). Note: Some bulb shapes may not be available in all colors. [Amazingly Bright, Even Over Time!] FCL LEDs maintain their brightness almost even after stabilization. We've developed LEDs that maintain brightness without drastically dimming after a few minutes of use. This is more than 10 times brighter than factory lights (compared to factory h16 bulbs; h16 values are our own measurements). The lumen count of our products is measured by a third-party organization in Japan. We don't measure the lumens immediately after switching on, when the car's lights are at their brightest, but rather the brightness after five minutes when the lumens have stabilized—that is, the brightness at which the car's lights actually illuminate the road. We measured lights from other manufacturers with similar lumens, and found that their products were 20% less bright than immediately after switching on. FCL LEDs maintain a high level of brightness even after stabilization. All LED products are bright immediately after switching on, and their brightness decreases within a few minutes before stabilizing. Maintaining the same brightness immediately after switching on is not possible due to LED specifications. Therefore, please be careful when measuring lumen counts. [Same Light Emitting Point as OEM] By placing the LED chips closer together, we have recreated the same 360-degree light emission as the OEM halogen bulbs. Not only are they brighter, but the same light emitting point as the OEM bulbs eliminates blind spots and delivers the best possible brightness. The light emitting point and base position are designed to be the same as the OEM bulbs, eliminating glare and distortion of the cut-off line caused by excessive brightness, preventing dazzling for pedestrians and oncoming vehicles. [High Heat Dissipation and Long Life] Heat dissipation is crucial for high-lumen LEDs. Brightness means the chip generates a lot of heat, so poor heat dissipation can lead to a decrease in brightness over time and a significantly shortened product lifespan. For this reason, FCL's design, from materials to construction, is meticulously calculated to maximize cooling efficiency. The efficient heat dissipation structure, including cooling fins, heat pipes, aluminum alloy, and a quiet fan, prevents premature failure due to heat and maintains brightness even after lighting. Furthermore, the LEDs are IP66 waterproof and dustproof, ensuring long-lasting use even in bad weather, including rain and snow. [Examples of compatible vehicles] Nissan Silvia S15 S14 H19.6-H20.8 / Skyline R32 R33 H3.8-H10.12, Subaru Legacy BP series H15.10-H21.4, BH series H10.6-H15.5, and other vehicles that use H3 H3C bulbs. *Please note that installation may not be possible depending on the vehicle's specifications. Please be sure to check the size on the actual vehicle before purchasing. Perfect for customizing vintage, historic, and classic cars. [1-Year Warranty (Unlimited Replacements During the Warranty Period) & Vehicle Inspection Compliant] This product is designed to meet Japanese vehicle inspection standards, including color and cut lines. Furthermore, FCL offers a comprehensive warranty for all parts during the one-year warranty period, offering unlimited replacement and inspection services throughout the warranty period, ensuring peace of mind. We have our parts inspected by a domestic specialist to ensure that the cut lines, lumen count, and color meet vehicle inspection standards. While Lime Yellow meets vehicle inspection standards, the inspector may occasionally determine that the product is ineligible for vehicle inspection. While other companies' long-term warranties limit replacements to one replacement during the warranty period or offer shorter warranties for certain parts within a product set, our company offers unlimited replacement coverage, even in the unlikely event of a second defect during the warranty period. If there is a defect in the product, we will also cover the round-trip shipping costs, and support will be provided by specialized staff in Japan, so if there is any malfunction or problem, please contact our customer support directly. [Product Precautions] - Cannot be installed on vehicles requiring a bulb adapter. - Please note the polarity. If the light does not light, insert it backwards. - The fins become very hot, so be careful not to let them come into contact with wiring or tie wraps, and be careful not to let them interfere with heat or the fan. - If the original fuse is less than 15A, we recommend replacing it with a 15A fuse or using a separately sold relay harness. There is a risk of the fuse blowing. - For models such as H1 and H3, the waterproof back cover may need to be modified. - Lime yellow is within vehicle inspection standards, but may be deemed incompatible by the inspector. - The waterproof rubber may occasionally break. If this occurs, replace it with the spare rubber provided (this may not be included depending on the time of purchase). - Imported vehicles may require a separately sold relay harness or canceller to avoid the bulb warning light or prevent the fuse from blowing. The temporary flashing of the light when starting the engine is dependent on the vehicle specifications. New