Complete Work In Minutes, Disc Brake Separator, Disc Brake Piston Tool, For Brake Maintenance,

Parameters: Adjustment range: 0 - 3.3 inches (0 - 85 mm); width: 2.0 inches (51 mm); thickness: 0.2 lbs (6 mm); Weight: 1.7 lbs (0.78 kg) (standard type), 2.4 lbs (1.1 kg) (reinforced); Supports single pistons, parallel pistons and opposite pistons calipers. Please apply or to the screw part of the center bolt with each use When replacing brake pads, use this easy-to-use disc brake separator to push and expand the position of the piston to replace the pad. Note: Not for use with handbrake calipers. Depending on the degree of adhesion, it may not be able to be used. Please apply regularly to the screw thread. Easy to work with. The sliding handle makes it easy to loosen or tighten and the claws that push the piston into a parallel move and do not have any side shaking, so you can work just by rotating the handle to improve your work efficiency. The ratchet can be inserted into the hole of the handle, so you can conveniently turn it with a ratchet without having to turn it tight High Efficiency: The sliding handle makes it easy to loosen and tighten and the claws that push the piston into a parallel move and do not have any side shaking, so you can work just by rotating the handle to improve your work efficiency. The sliding handle makes it easy to loosen or tighten it. Compatible with single piston, parallel piston opposite 2 piston caliper 1/2 (12.7 mm) receiver tool (ratchet) can be used to push back the piston on on the brake caliper 【Essential Tool for Brake Maintenance】Disc brake separator is used for pushing and unfolding brake caliper piston when replacing brake pads. Simply pinch and unfold and push back in seconds without damaging the piston (Firm Quality) The weight of this product is very comfortable in your hand. Made of high quality steel, it is virtually solid with thick, thick, heavy weight. This is a tool like tool that can be used only for work, without having to worry about "breaking, bending or bending." Compatible with single pistons, parallel pistons, and opposite piston calipers. Can be used with 1/2 (12.7 mm) insertion angle tool (ratchet), 0.8 inch (21 mm) wrench. Size: Adjustable range (approx.): 0.5 - 3.2 inches (12 - 82 mm); size: 2.0 x 4.3 inches (50 x 110 mm) Complete your easy and effortless work. A must-have for brake pad replacement, brake maintenance and piston adjustment

We will only accept returns if the item is different from the picture shown

on the product page or is not in the same condition as the product description.

All items are 100% authentic: we verify authenticity before selling.