Label:Yes
Color: Yellow, blue
Packing: 10pcs sponge
Material: Sponge
Size: as shown
Features: High temperature resistance
Introduction to use:
First let the cleaning block absorb enough water, squeeze some out with your hands, and retain about 70 percent of the water. With the handle of the soldering iron, rub the heated tip on the cleaning block twice, and the tin layer above will be bright as new, and the soldering tip will be clean, and then welding can be implemented.
Features:
1. Anti-hot and high temperature.
2, soaked foam, no sulfur.
3, clean the iron head more thoroughly.
Welding cleaning sponge, placed on the soldering iron frame, clean the soldering iron nozzle, can quickly clean the oxide on the surface of the soldering iron head, and will not harm the Zinc Zinc Zinc Zinc Alloy layer of the soldering iron head. Prevent the soldering iron head from oxidation, overheating and burning, remove solder residue, and keep PCB board components clean.
When using, sprinkle a little water on the cleaning sponge, which will expand in contact with water. The sponge must soak in water, not too much but not too little, squeeze the excess water, so that the welding nozzle can get a good cleaning effect. If you do not use a cleaning sponge, it will damage the nozzle and cause no tinning.
Notes:
Transition: 1cm(0.39in)=10mm=0.39inch
Please allow 1-3mm(0.04-0.12in) error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
