MOTOR POWER LED Strobe Controller 12V 24V 10 Patterns Knight Rider Indicator with Switch 20-18 Blinking/Solid/Flash

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

You can control the lighting patterns of LED bulbs, daytime running lights, and LED tape lights. If you change the lighting pattern at an event, you're sure to attract attention. It can also be set to normal on/off on public roads. It is compatible with a wide range of vehicles, from motorcycles, compact cars, and regular cars to 24V trucks. There are 10 lighting patterns in total, and it has a pilot lamp so the pattern is easy to see. [Product Description] ■ Strobe controller - You can control the lighting patterns of LED bulbs, daytime running lights, and LED tape lights. - If you change the lighting pattern at events, you're sure to attract attention. - It can also be set to normally on/off on public roads. ■ Compatible with 12V/24V -It is compatible with a wide range of vehicles, including motorcycles, light cars, regular cars, and 24V trucks. ■ Comes with a pilot lamp that shows the lighting pattern -There are 10 lighting patterns in total, and it has a pilot lamp so the pattern is easy to see. [Product details] Operating voltage: 12V/24V Maximum output: 24W - Lighting pattern memory type (When the light resumes, it will return to the previous lighting pattern.) ・Size: Please check the image. [Lighting pattern] ・Normal lighting - Left and right alternate high-speed flashing (strobe) short, long ・Alternate flashing - Alternating left and right rapid blinking - Left and right flashing simultaneously - Left and right flashing simultaneously (speed up) ・Alternate left and right firefly flashing (fade out) - Random firefly flashing - Fireflies flash simultaneously on both sides *Press and hold to turn it off. *When used in a car, the lighting pattern will be memorized even when using ACC rather than constant power. [Set contents] ・Controller x 1 ・Wiring x 1 ・Double-sided tape x 1 ・English instructions [Reference conformance] ・12V/24V car [Notes] ■This product is for LED only. Please use LEDs that do not exceed 2A (12V) or 1A (24V). This may cause damage. ■Please refrain from using strobe lights on public roads. ■The controller is not waterproof. Please install it inside the car or in a place where it will not get wet. ■The wiring coupler has a specific direction. Please note that forcing it in may cause damage or a short circuit.