Description:
CNC Machined from a single aluminum billet
Reduces inlet air temperatures equal more power
Prevents inlet and turbo from clogging up
This valve removal kit allows you to completely remove the system from the engine.
Advantages of blocking :
Turbo spools up quicker, and at lower revs (less turbo lag)
Prevents carbon build-up inside intake manifold, and ports
Smoother pick up from idle and better fuel economy
Cleaner engine oil helping to give longer engine life.
Lowers soot output (less smoke on pull off)
Application:
For 1.9 8v TDI VE 90/110 and PD100/PD115 diesel engines
Material: ALuminum
Color: Black
Size: As the picture shows
Installation Instructions:
1. Remove and lift off the engine cover.
2. Pull the vacuum hose off of the valve.
3. Remove Pipe From Exhaust Manifold.
4. Connect blanking caps on to each end of the cooler. (skip this step if your vehicle doesn't have an cooler.)
5. Blank off the vacuum pipe.
6. Blank the hole on the exhaust manifold.
7. Connect the tube to the intake manifold.
8. Start the vehicle and check for any leaks.
Package contains:
1 x (as shown)
*This product is Brand new
*Due to the difference in light and screen, there may be a color difference between the actual color and the picture.
*Due to manual measurement, the product may have 1-5MM error
*We take no responsibility in teaching you how to install. professional installation is highly recommended.
Every car is different. Engine managment light might come on if not installed correctly, some are a no fuss install, we recommend a remap to get the most out of this item.
