Product Name: Waterproof Wireless Remote Control Switch
Input Voltage: 12V - 48V
Load Current: 8A
Protection Level: IP67
Range: The open field is more than 50 meters
Max Number of Controllers: 32
Color: Black
Receiver Sensitivity: -95dBm
RF Frequency: 433Mhz
Features:
- Waterproof Design: The remote control socket is equipped with IP67 waterproof structure the rubber cover lip on each socket helps prevent liquid from entering, for indoor and outdoor use .use safely even in damp places.Please don't soak it in water.
- Wide Application: This long distance remote control switch is used in DC motor, pump, awning, linear actuator, garage door,electric curtain, motorized rolling doors, towing winches, conveyors, lifting frame, massage chair, and any forward reversing motor equipment, or any application that requires the ability to forward reversing motion.
- Stable Signal. RF wireless relay remote control switch, which uses 433MHz frequency radio frequency technology, has strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range is up to 50 meters(164ft) with no obstacle. DC motor remote control switch can control the motor forward or reversing by remote control.- This 433Mhz RF motor forward and reversing switch, can remotely operate the the DC motor through the remote control. Stable and reliable performance with high reception sensitivity (greater than or equal to 95dBm). Working voltage DC12V to 48V, rated current 8A.
- Easy to Use: Connect the input end of the receiver to the power supply and the output end to the load equipment, that is, complete the installation. Press button "Up triangle", the motor will rotate forward; Press button "Down triangle", this motor will rotate reversing; Press button "Block", this motor will stop.
How to pair a new controller?
1. Interlock optional:
Power ON: The switch buzzer beeps once to enter pairing mode.
Press button "Up triangle" and "Down triangle" on the remote for about 4 seconds, while buzzer beeps 3 times, which means the interlock is matched successfully.
2. Jogging optional: (Transient and intermittent action mode, press and hold the button to start the device, release the button to stop the device)
Power ON: The switch buzzer beeps once to enter pairing mode.
Press button "Block" and "Down triangle" on the remote for about 4 seconds. while buzzer beeps 3 times, which means the jogging is matched successfully.
3. How to clear the memory?
Press and hold the "Block" button on the remote for 6 seconds.
The buzzer will beep 6 times, indicating all matched codes are invalid.
4. After power on 10 seconds, the switch buzzer will beeps twice and exit the pairing state.
To re enter, just disconnect and then connect power.
Package Including:
1 x Waterproof Relay Receiver
2 x Remote Controls
1 x Manual
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
