New parts are included with the "Unryu-class No. 1 Unryu", which was planned to strengthen the carrier force before the outbreak of the Pacific War. The product is an unpainted kit that requires assembly and painting with adhesives. The scale is 1/700, and the ship bottom is not included. This product is composed of the conventional (special series) mold and newly designed additional parts. Unryu was built at the Yokosuka Naval Arsenal as the Unryu-class No. 1 ship and was commissioned in August 19. The prewar Kai (5) plan planned to add 15 ships. The first ship was Unryu, and 15 of them later belonged to the second ship, including Amanagi and Katsuragi. From the time of commissioning, the exterior was submersible camouflage, and a water spout was added later to the navigation fender. Unlike Amagi and Katsuragi, the aircraft shape was simplified to shorten the production period. Due to the rounded shape that is traditional for Japanese aircraft, the aircraft were dissatisfied even after commissioning, and they continued to wait in nearby waters. In December 1909, the ship headed for Hishima carrying army troops and Ohka, and was sunk by a torpedo attack by a US submarine. (br) The product can be made by choosing either the figure, with the final impression at the time of commissioning in August 1910, and the addition of the ejection cannon. (br) The structure is different from Amagi and Katsuragi, and the original rounded sponson shape is reproduced. Due to the newly designed parts, there may be differences in the uniformity of the reproduction of equipment depending on the release date of the product, so some parts have been divided in consideration of the painted surface, and the No. 13 radar has a truss structure and a new sealed part with the shape of the overhead wire is used. (br) The Crebridge for the Type 21 6-barreled gun and the front insulator base are reproduced more delicately than the previous attached parts. (br) The 5.0-inch (12.7 cm) twin anti-aircraft gun A1 Kai 1 has been subdivided into a total of 6 parts, increasing the resolution of the model from the existing 2 parts. (br) The 9-meter machine gun is made into two parts in consideration of the paint surface, and the mount is prepared as a separate part, with one top plate as a selection type. (br) The 12-meter machine gun is made of canvas and unloading machine room canopy in consideration of the paint surface. Each coat is applied and assembled, and the later model is glued. (Br) The three-part configuration allows the vehicle to be separated from the loading platform and assembled after painting, eliminating the need for masking. (br) The 12-meter long internal fire kettle can also be expressed without canvas. The aircraft carrier reproduces the uneven shape and light holes in the mold, making it a model with a high sense of precision. The chrysanthemum crest on the bow is newly sculpted. A pair of fender lights, which were omitted in the previous model, are provided as additional parts. A decal containing the fleet name (Mardi Tone painted in warship colors) has been added. The Type 96 1.0 inch (25 mm) triple gun is a standard specification that reduces painting and painting labor. Includes 6 of each of the 4 models: Zero Fighter 52, 21 (Bomber), Suisei Bomber 12, and Tenzan Fighter. Also includes 6 of the kamikaze pilot's Sakura. The hull is divided into left and right. The fender windows along the fenders can be recreated to show the state they were reduced in during combat training. The fleet's anchor deck is equipped with anti-slip strips, bollards, hose reels, and 3D-sculpted anchors. (br) The flight deck is made up of one part, and the elevator is a separate part. The surface is sculpted with a variety of shapes such as maneuver eye rings, loading brake lines, and expansion joints. (br) The flight deck has a windbreak fence sculpted. (br) The undetectable No. 21 radar and two hidden detectors on the flight deck can be selected for storage or deployment. (br) The elevator can be installed by selecting whether it rises or falls into the storage box. (br) The truss structure behind the flight deck is expressed in 3D sculpture. The crane on the flight deck is in the stowed state and the crane storage state. (br) The base of the Cambridge is a one-piece part made by a slide mold. (br) The chimney is composed of two parts, upper and lower, and the internal conductor plate is a separate part that is precisely sculpted. The funnel cap is molded in a "contracted" state with a sense of precision. (br) The Cambridge (Air Defense Command) comes with a binocular telescope part that enhances the sense of precision. (br) The upper capillaries and gun signs on the side of the fender are separate parts, and the stripe pattern on the floor is also finely sculpted. (br) The aircraft cannon and anti-aircraft gun sponson post are reproduced with fine molded parts. (br) The equipment such as the radio aircraft support pillars on the side of the fender and the shipboard lighting are made into a wide variety of separate parts. (br) The 25mm triple cannon has a precise shape and a structure that is easy to paint, and two parts and a standard molded part for 2018 are included. This model includes four types of fleet aircraft, a total of 22 aircraft. (br) The models are four types of "Zero Fighter Type 52", "Zero Fighter Type 21", "Suisei" and "Tenzan" that existed in the 6th First Air Group. (br) Four Zero Fighter Type 52s are included, and the windshield and propeller are separate parts for painting. (br) Four Zero Fighter Type 21s (Bonbon) are included, and the deployed aircraft on both wings and the 550 kg bomb under the fuselage are reproduced as separate parts. The Suisei Type 12 (Bonbon) has a windshield, propeller, and 60 kg bomb as separate parts, making it easier to paint. (br) The Tenzan attack aircraft comes with four weapons, and is characterized by a four-wing propeller and a 650 pound bomb under the fuselage that come as separate parts. (br) Six "Kamitsuke plane Sakura" that were stored in the storage space during the transport operation at the time of the sinking are included. (br) The molding color is a pale green color that takes into consideration the color of the main parts when painting the opposing camouflage. (br) The carrier-based aircraft and machine gun parts are gray. (br) Includes two types of decals for marking aircraft on the camouflage flight deck. (br) Includes one decal for the white lines of the ship's name and position. [Accessories] 66 runners, 1 assembly manual, 2 decals (br) (br) *This product is made in Japan. This product is a plastic model kit that requires assembly.
A plastic model kit that requires assembly and painting. Separate tools, paints, etc. are required.
