Features:
This is a normally close proximity switch sensor with 2mm detection distance.
When proximity switch is close to some target object, it will send out control signal.
It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
High sensitivity, quick response, stable performance.
Noncontact detection avoids the sensor and the target object from damages.
Specification:
Model: LJ8A32ZEX
Detection distance: 2mm+10percent
Setting distance: 01.6mm
Delay distance: <10percent of detection distance
Detection object: Magnetic metal(The detection distance decreases when it is nonmagnetic metal)
Standard detection object: Iron 12*12*1mm
Response frequency: DC:0.5kHz AC:25Hz
Supply voltage: DC1224V (636V) impulse (PP) below 10percent
AC110220V(36250V) 5060hz
Withstand voltage: AC1000V 5060Hz 1min
Current consumption: N.P type: <13mA, D type: <0.8mA, A type: <1.7mA
Control output: N.P type: <300mA, D type: <200mA, A type: <400mA
Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption
Ambient temperature and humidity: 30~65 celsius (No ice, no frost), 3595percent RH
Temperature influence: Temperature range 30~65 celsius , at 23 celsius , +15percent detection distance
Temperature range: 25~60 celsius , at 23 celsius , +10percent 0detection distance
Insulation impedance: >50M Ohm
Housing material: Nickel plated brass
Detection surface: ABS
Weight: Approx. 25g
Package list:
1 * Inductive Proximity Switch
This is a normally close proximity switch sensor with 2mm detection distance.
When proximity switch is close to some target object, it will send out control signal.
It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
High sensitivity, quick response, stable performance.
Noncontact detection avoids the sensor and the target object from damages.
