Stained Decorative Privacy Glass Film,Heat Transfer Printing Vinyl Window Film,Frosted Window Sticker for Kitchen Door Home

Hign-concerned Chemical : None

Function : Decorative,Heat Insulation,UV Protection,DIY Model Number : P006 Surface Treatment : Embossed,Frosted / Etched,Stained Feature : Static Cling Material : PVC Origin : China

Customize Your Personal Space with Static Cling Frosted Window Film--frosted design adds a blear beauty to your windows, static cling to the glass for easier installation, can peel off and paste for many times, reduce glare and heat to let you relax and comfortable. Frequently Asked Questions:1. How to deal with the air bubbles? Use a hard plastique squeegee or any plastic card to squeegee air bubbles and water. If you find it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles. 2. Why the film fall off after a while? Please check if you have removed the liner, trimmed the edges or squeegeed excess water and bubbles. Leave a 1/16" wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass and allows you to completely squeegee the water and air from under the film.The blade or the knife for cutting the film is not sharp, resulting in deformation at the edge of the film. NOTE: Film can dull a blade edge quickly; and a dull blade can tear film. 3. Can I remove the film at a later stage? Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess. 4. How to peel off the backing liner? All static cling films have a liner, but some are clear and hard to see at first glance. If you can't separate the liner from the film, place a piece of scotch tape on both sides of the sheet, fold the tape over to create tabs, and use the tabs to separate the two sides.