1. The settings of the host: #1 To connect the Bluetooth controller, the Controller Connection (Bluetooth) option of the host is On, or close Flight Mode, #2 On the main page, select Controllers->Change Grip/Order, let the host be in the state of searching for Bluetooth devices . (This operation is not required to connect back)
3.Note: If the host is difficult to pair the controller, there may be too many Bluetooth devices connected to the host, you need to manually clear the Bluetooth information (System Setting->Controllers and Sensors->DisConnect Controllers);
2. Pair the controller with the controller: When the controller is off, press and hold Y (the button near the Start) + Home to turn on, the 4 LEDs are in the status of running lights, and the channel indicator corresponding to the connection is always on. If it is not synchronized within 2.5 minutes, it will automatically sleep. If the Bluetooth connection is successful, the corresponding channel indicator LED is always on (Switch host assignment)
3. Connect the controller to the host: When the controller is turned off, press the HOME button to wake up the controller for 1 second. After being awakened, it will automatically connect to the paired host to connect back. If the connection fails after 10 seconds, it will automatically sleep.
4. Shutdown and hibernation of the handle: Long press the Home button for 5s to turn off the handle. After the handle is successfully connected, if it does not operate for 5min, it will automatically enter the sleep state, the host screen will be closed, and the handle will automatically sleep
5. Low voltage alarm: If the lithium battery voltage is lower than 3.55V±0.1V, the current channel light flashes promptly to indicate that the voltage is low, and if the lithium battery voltage is lower than 3.45V±0.1V, it will automatically sleep
Description:
Product category:Game Handle
Product material: ABS plastic
Battery capacity: 3.7V 500MAH, battery life is about 8 hours
Content:
1 *Data line
1 *product
1 *Manual
1 *box packaging
Note: Due to some errors in manual measurement, the actual object should be received as the criterion
