Feature:
1. Surrounding: The knee massager utilizes 3D surrounding massage technology to target multiple pressure points around the knee, providing comprehensive relief from knee pain and discomfort.
2. Temperature Heating: With an internal heating design, the knee massager can provide an even and consistent flowing of heat to soothe sore muscles and reduce joint stiffness.
3. High Frequent Vibration: With 9 heat settings and a powerful, yet quiet, high frequent motor, the knee massager can efficiently alleviate knee pain and stimulate bloody circulation, promoting joint mobility.
4. Red LED Light: With 16 light bulbs surrounding the entire knee area, the knee massager can penetrate deep into the skin, promoting a healthy and nourished knee.
5. Massage: Incorporating sophisticated massage technology and 16 bian stones, the knee massager delivers a personalized, dynamic, and simulated human like massage experience that ensures relief from knee strain and weakness.
Specification:
Item Type: Knee Massager
Material: ABS
Battery: Lithium ion batteries (built in)
Capacity: 3600mAh
Hot Compression: 9 gears
Vibration: 9 gears
1. Press and hold the power button for 2 seconds to turn on the machine, the power indicator light will be on. The default gear of the hot compress function is 1, and the hot compress display is "01". The infrared light will be on. 1 gear vibration function is on, and the vibration display is "01". The output strength of electrode output port and electrode function are 1.
2. Press and hold the power button for 2 seconds, turn off the device, each time you press the hot compress button, the hot compress function will change 1 gear, total 9 gears. 1‑2‑3‑4‑5‑6‑7‑8‑9‑close 1 cycle. Hot compress display is "01", "02", "03", "04" "05", "06 07", "08", "09", "08", "09 "00", "01". Infrared light turns on and off when the heat application function turns on and off.
3. Each time the vibration button is pressed, the vibration function gear increases by 1 gear, total 9 gears. 1‑2‑3‑4‑5‑6‑7‑8‑9‑closed 1 cycle. The vibration display shows "1", "2", "03", "04", "04", "05", "05", "05", "05", "05", "05", "05", "05", "06", "7", "08", "09 ", "00" and "01". There is only one compound mode for vibration.
4. Each time you press the key, the electrode function strength increases by 1 gear, total 5 gears. 1‑2‑3 4‑5‑1 cycle. The electrode has only one compound pattern. When the power is low, the power indicator flashes and the buzzer prompts "drop, drop" to charge the battery. When the battery is extremely low, the power indicator flashes and the buzzer "beep, beep, beep" automatically shuts down after three times. Press the power on button, and it will automatically shut down after 30 minutes of work. The power indicator flashes when charging. When fully charged, the power indicator light is on.
5. Connect the physiotherapy cable to the electrode output socket and the other end to the two electrodes. The electrode piece is tightly attached to the place where the massage is needed. (2 electrode pieces must be attached to a person at the same time for massage.).
Package List:
1 x Knee Massager1 x English Manual1 x USB Cable2 x Gel Patches1 x Electrode Cord
