Feature:
1. Adopting 4?stroke power and 4HP air?cooling technology to improve the reliability of the engine.
2. The outboard engine is controlled and operated by the handle, which is convenient and easy to operate.
3. Equipped with air cooling system for continuous and effective heat dissipation, greatly prolong service life.
4. Low noise design, the noise is less than 85dB. Strengthened transmission design, which has stable performance.
5. Made of high?quality metal materials, anti?corrosion, suitable for use in fresh water and salt water.
6. It can be applied to inflatable boats, fishing boats, sailing boats and yachts with superior performance.
Specification:
Condition: 100percent Brand New
Item Type: Boat Engine
Material: Metal
Color: Black
Technical Parameters:
Overall Length: Approx. 92cm36.2in
Overall Width: Approx. 36.5cm14.4in
Overall Heigh: Approx. 22cm8.7in
Transom Height: Approx. 42cm16.5in
Weight: Approx. 9.7kg21.4lb
Full Throtlle Operating Ranfe: 50006000rmin
Speed: 20Kmh(four people)
Type: Four Stroke
Ignition System: CDI System
Strating System: Manuat Start
Strating Carburetion System: Choke Start
Propelle: R 714x5A(Inch)
The Engine And The Propeller Gear Ratio: 2: 1
Gear Ratio: 27: 13
Recommended Fuel: 90# uned gasoline
Recommended Enginr Oil: 4stroke outboard motor oil
Start Steps are as follows:
(1) Insert the emergency flameout insert into the flameout switch slot
(2) Insert the oilimport plug which is on the fuel oil pipe into the fuel tank socket
(3) Insert the oilexport plug into the tubing socket of the base of the outboard motor
(4) Contrarotate the ventilation screws on the tank cover
(5) Push the hand pump several times,till it is full of fuel oil and the hand pump gets hard
(6) Move the shift lever to the "Neutral" position
(7) Turn the throttle handle to the "Start" position,that is the start marks on the handle is aligned with with the arm marks
(8) When the engine is cooled off, pull out the choke lever to increase the concentration of combustible gas mixture concentration, make the engine easier to start
(9) Pull the start handle,when the claw of the starter is joggled with the flywheel disk, pull out the start rope quickly to start the engine
(10) After the engine starts,let the engine run slowly 2 to 3 minutes to preheat the engine,then push the choke lever to the initial position
(11) After the engine starts,please check whether the cooling water outflows stably or not,if there is no water or the water outflows intermittently,please close the engine and check it
(12) When sailing,please hung the extinction rope on the wrist or belt to insure safe sailing.
Package List:
1 x Engine5 x Hex Screwdriver 3 x Wrench 1 x Sleeve 3 x Screwdriver 1 x Measuring Cup 1 x Funnel 1 x Manual
Note:
Before using the engine, add gear oil to the gears, and change the gear oil after the running?in period (10 hours).Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.Adopting 4?stroke power and 4HP air?cooling technology to improve the reliability of the engine.
The outboard engine is controlled and operated by the handle, which is convenient and easy to operate.
Equipped with air cooling system for continuous and effective heat dissipation, greatly prolong service life.
Low noise design, the noise is less than 85dB. Strengthened transmission design, which has stable performance.
Made of high?quality metal materials, anti?corrosion, suitable for use in fresh water and salt water.
